• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Frame repair options

flashover604

Scrambler Junkie
Lifetime Member
City
Lancaster
State
Oh
Hi all. I didn't know where to post this but I figured here was a good place to start and the mods would place it where they see fit.

My name is Zach, and I have a problem.
My frame is rotted. Bad.

Here is my question: how do I fix it?

1. New frame. No bueno, no budget.
2. Try to find a parts cj7 with a decent frame section on the drivers side rear from spring hanger to shackle.
3. Cut out all eight bad spots and weld in new metal.
4. Sell it and buy a bunch more guns...


Out of curiosity, I don't suppose a scrambler frame is the same as a 1975 cj5 frame at the rear springs are they?
 
Option 2 and 3 ore both a no go. The cj5 frame is not the same and the 7 is close but you have another issue. If the arched section is rotted so we be the last 30 inch to the bumper. That part is usually destroyed. I cut me whole back 36 inches off and welded new 2x3 tube in place then i plated the entire inner and bottom rail all the way to the front springs. It is really the only way to do a good fix if you want to salvage your frame. It is a lot of work but i only spent about $150 on tubing and plate from a supply house.
 
Back
Top