• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Full Door Part: Where to buy?

Gary R

Legacy Registered User
City
Arlington
State
TX
Gentlemen,

I have the full, hard doors for my Scrambler. I have purchased the new interior door panels, to be installed after paint....at the very top of the factory door panels, they have a small chrome strip that installs on the very top edge, from side to side.

Anyone know where to get them? I'd search for them more thoroughly, but I'm not exactly sure what they are called? :shrug:

Thanks,
 
Gary if nobody here has them there's a guy named Jay Newsome at Jeepsalvage in Statesboro Ga. that may have them.
 
I'm not sure what it is called. You may try cj-jim or jerseyjeeps, they may have them. Otherwise, there is always Collins Bros.
 
Thanks!!!!

Thanks for all of your replies. And Will, thanks for reminding me of the CB page that had them! I knew I had seen them somewhere, and those are the ones!

Not trying to be controversial, but, I have had phenomenal luck and really like dealing with CB. A fella up there named Barrett has always gone above and beyond to help me. While I know they are quite high on some things, they are very reasonable on others (such as these door strips). I am not going with a restoration that looks just stock as if it rolled out of the factory, but am building it how I want it, and really never plan to sell it- especially after a frame-off resto. However, I am going back with 90-percent (or more) stock equipment. On many of these hard to find items, I have found that I can have one-stop shopping up there- which is nice! Granted it is local for me (an hour drive each way), and saving shipping is nice. In my entire life, I have NEVER seen so many OEM/NOS parts for a vehicle that hasn't been made in almost 30-years. I'd suppose if I had stumbled onto that gold mine of old (new) parts, I'd probably be a little proud of them too! Once they are gone, they are gone!

Anyway, just my :twocents: I've had great luck with CB.....and nope, I have NO affiliation with them. I wish I did though, for obvious cost saving reasons ;)

Have a good one, and thanks again for all the replies folks! That's why I visit this site about 50-times per day!
 
Last edited:
I agree with you. On the rare occasions I have dealt with them, they have excellent customer service. And I understand the value of oem parts. Each year that goes by there are a few less cj's on the road.
What I don't like about them is their attitude towards the jeep hobby. They buy the junked out jeeps for a few hundred bucks a piece and expect to make 4 to 5k off the parts. Here about 15 or 20 years ago collins bros went to almost every junkyard around Texas picking up wrecked cj's (Their big field of parts didn't appear overnight) and hauling them back to their own yard. That's why there's not any junkyard cj's in Texas anymore. I understand the value of these parts and know that all the hard to find stuff is no longer produced and if I made a business strictly based on jeeps I would expect a little monetary return also, but not to the point to where I rip people off just to make a buck. Over the last 6 months I have bought or received FREE from local jeepers just about every oem part I need to restore my jeep. And for those of you who have seen the pics, my jeep needs a LOT of parts. All the pics Ive posted so far are only a sample of what I bought. All have been more than generous and I have made a great deal of friends from this experience.
By jacking up the prices of all their used parts collins brothers destroys the hobby for regular people like me who can't afford to pay 1k for a wrecked frame and a scrambler bed. this both ruins the thrill of hunting for parts and ruins the value of my jeep. Lots of people who may want it in the future would turn it away because of the money I have invested and the resluting price. When I'm done with my jeep, I want it to be something I can drive and enjoy. NOT a vehicle that I roll out once a month to put in car shows. I believe parts should be bought and sold to help out other people in the hobby, not for personal gain. I've also learned that when a part is bought by collins bros for, lets say $5, and they sell it for $40, then the person that sells that part in the future will also expect to get $40 or very close to it. Very rarely does a part drop substantially enough in value to become a good deal again. If you look at it this way, Collins bros is slowly and singlehandedly destroying the cj hobby for people like me. This type of business means that people who can't afford the parts can't afford to have the jeep that they want, hence less people in the hobby.
The used parts won't last forever, that's a fact. Once they're gone, they're gone. But if you look at them for what they are, they're just parts. That $900 AMC cb radio on ebay is nothing more than a used 30 year old radio. Those perfect-condition highback seats are just a steel frame, some foam and cheap vinyl from the 80's. That AMC emblem is a piece of plastic, and that spare tire carrier is 2 pieces of square tubing and some bent flat-stock. Now if all these parts were treated for what they were, we wouldn't have any left since they would basically have no value and get trashed, so I'm not trying to do that by any means. But I often question the sanity of people who pay 1k for a used radio on ebay. I guess if they can afford it it's a no-brainer for them, but its just crazy to me.

Sorry, I tend to get a little carried away but I would love to see the jeep hobby made affordable for everyone so they can enjoy it regardless of their budget. And with the effect of collins brothers being felt in places like ebay, craigslist, and even here on the forums I just don't see it happening any time soon.

I tend to ramble a bit but that's my 2 cent opinion of collin's brothers jeeps.
 
Last edited:
Will,

I hear ya loud and clear, Brutha. You make some excellent points!

It reminds me EXACTLY, of another hobby I have, which is restoring old classic bicycles. (footnote to myself: why the hell do I always fall for the expensive hobbies?)

Some of us 40-something year olds, will remember the old Schwinn 'Krate' series bikes from the 60's and early 70's. They had a 20" wheel on the rear, a small wheel up front, a 5-speed shifter lever, banana seats, and ape hanger handlebars. They were about $100 new back then, which I know isn't relevant to prices today. However, these bike parts for these old relics sell for hundreds and hundreds on eBay. For example, a pristine yellow Lemon Peeler bike that used to sell new for $100, is sometimes well over $2,000 restored, online. Unreal. And just like our Jeeps, the parts are becoming scarce. Granted there are tons of reproduction parts, but for a purist to buy old original parts? It is absolutely scarey how much some of these Schwinn parts go for.....I need to find 'new' and MUCH more affordable hobbies myself :angry:

But I hear your points, and appreciate your reply.

P.S. My wife has spent a small fortune at the pottery place there in Marshall :) And are you guys covered up with wild hogs out there?
 
Last edited:
Yeah, for the most part. It really depends on the area, they prefer bottom land by far but really move around alot which makes it difficult to get a good population estimate. Where I'm at there's more deer than anything.

The pottery place is a favorite around here, I like it because they make almost everything they sell in-house, and you can watch them make custom stuff also. I've watched the pottery makers a little, they are true craftsman. Tell your wife I said thanks for boosting the local economy a little :thumbsup:

Next time you guys are in the area drop me a pm, I'd love to get together sometime.
 
Back
Top