• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

HEI and Stock Tach

twmattox

Legacy Registered User
City
Arcadia
State
IN
I have read a number of posts and am still confused. So, I will ask outright...

If I upgrade to an HEI and have removed the computer system, will the factory stock tach work???
 
It should- complicated story short, the tach doesn't read from the computer, it reads the differential voltage between the accessory 12v line and the coil 12v line. The difference is what makes the tach move.
 
But, isn't the 12 volt coil line part of the Motorcraft dizzy system I am replacing with the HEI? I guess I just don't fully understand how the HEI connects.
 
The tach I just hooked up required a 12v source which is nothing to do with with the coil or HEI, just a 12v power source. I tied into the lead that fed the radio. I then ran a new wire from the HEI tach lead to the tach terminal marked "coil".
 
twmattox said:
I have read a number of posts and am still confused. So, I will ask outright...

If I upgrade to an HEI and have removed the computer system, will the factory stock tach work???

Yes it will still work.The ignition wire goes thru the OEM tach,and it reads the current pulses as the coil fires,be it the stock coil,or a HEI coil.
 
Back
Top