• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

How much is a 401 Block Worth?

newfie

Basic User
City
calgary
State
AB
I want to rebuild a 401 to replace the 304 in my Jeep. I found a block/crank, but I think the guy is asking way too much. I can get a running 360 for the price he wants for just the 401 block/crank I don't see many 401's around, but are they worth that much more?
 
IMO, 401's are worth much more than the 304's or 360's. After searching for a while, I bought my first complete 401 for around $400 and had it shipped here out of Cali. because I couldn't find anything local for sale and they are somewhat hard to find. Plus, I thought $400 was a pretty good deal for a complete one.

Two weeks later I found another complete on for $300 that was 15 miles from my house, so I picked it up as well! I wouldn't pay more than $150 for a block and crank. And that would only be if I have the rods, heads, etc. to go with them. You will have a small fortune gathering all of the parts up.

I usually see them going in the $500-800 range. I think you would be better buying a complete one rather than trying to piece one together; unless you are going to be replacing the rods, heads, etc. with something besides the stock pieces. 401's are out there, it just seems you have to be willing to ship or be patient! :thumbsup:
 
I'd been searching for about a year before I found mine. The only other lead I had was a guy with a block and crank for $600. During a summer spent elsewhere, and some dumb luck, I stumbled into a guy with three 401s that he had for sale. I bought a complete engine, condition unknown, for $300 or $350. It turns out that it was cracked, but my machinist was able to sleeve one cylinder and save it. Now that I'm older and have a job, I'd buy another 401 for that price just to have a spare or for an investment. I'd place a 401 in the $600-$1000+ range if it's running and the condition is known.
 
I want to rebuild a 401 to replace the 304 in my Jeep. I found a block/crank, but I think the guy is asking way too much. I can get a running 360 for the price he wants for just the 401 block/crank I don't see many 401's around, but are they worth that much more?

Couple of years ago i had a 401 at the machine shop being hot tanked for a build. guy calls me awanting to buy the block and crank because they unaltered. told him they were not for sale but when he offered $1000 for them i sold them(never built another 401 to replace it either).

i have a complete, built 401 with alum intake and carb under my workbench that was squirreled away for my M715 project. I ended up going with a 6.2/NV4500 so i could be talked out of it for the right price.

Richard
 
Back
Top