• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Hydraulic clutch

timothy

Scrambler Junkie
Lifetime Member
SOA Member
City
baltimore
State
oh
I'm wondering of those using an hydraulic clutch if you think it's worth the change? And any other thoughts. It looks like a relatively easy swap. Now that I've said that it'll be harder than heck.
 
Do you mean the hydraulic clutch with the external slave or the one with the hydraulic throw out bearing?
 
Is there something wrong with the set up you have now? If no, leave it. If it ain't broke...
 
This is what I'm looking at.
9bfadb85184d4a0102b96493c17484ca-1.jpg


A friend & I were under my ride & he noticed the release rod that goes into the throw out lever was very loose. He also was able to take the rod out easily which is not what I'd need while wheelin. At the very least I'll have to fix the release rod looseness.


Sent from my iPad
 
I did this a few years ago. In the long run, it's probably more reliable, but I don't know that it was worth the trouble.
 
A friend & I were under my ride & he noticed the release rod that goes into the throw out lever was very loose. He also was able to take the rod out easily which is not what I'd need while wheelin. At the very least I'll have to fix the release rod looseness.


Sent from my iPad

Is the spring missing? Is it out of adjustment?
 
Is your Jeep lifted? Angles create problems as far as I can tell. I have a lifted 5 with mechanical parts and it hasn't failed but..... I don't feel entirely comfortable with it. I installed the setup you pictured in my 8 when it was apart years ago and it's lifted and has been trouble free. I would do it in my next project too. Definitely.
 
This is what I'm looking at.
9bfadb85184d4a0102b96493c17484ca-1.jpg


A friend & I were under my ride & he noticed the release rod that goes into the throw out lever was very loose. He also was able to take the rod out easily which is not what I'd need while wheelin. At the very least I'll have to fix the release rod looseness.


Sent from my iPad
What kit is that?
 
Tim- Long time, no post(me). Do you still have the NV4500? I'm currently contemplating a hyd. release for mine(NV4500) and need to call Parts Mike for more info. I'll let you know what I find out. Do you have the GM release arm(forged) or a stamped steel arm? I have the GM arm but may have to go to a stamped one for the hyd. to work. Again, I'll let you know.
 
Talked to PartsMike and he gave me the component list from their website that I would need to go hyd. I asked him about your jeep Tim and he said that it would probably work depending on the exhaust sys. clearance. He suggested you call him first and discuss it before ordering. PartsMike.com
 
Back
Top