• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Lift question

KDAWG84CJ8

New member
City
BROOKHAVEN
State
GA
Hey forum
Glad to be a member here. I have a question. I want to remove these shackles. The leaf spring look almost flat. Plus I want to lower it a bit. Any issues with changing out these shackles to an OEM set or Similar? I want the geometry to be correct. The rear set up looks stock. Thank you for any insight and help.
next thing on my list is to remove the body lift
 

Attachments

  • 69FB1EC4-207C-41E2-A6DE-C107C850E768.jpeg
    69FB1EC4-207C-41E2-A6DE-C107C850E768.jpeg
    113.5 KB · Views: 37
  • 6019D875-2E00-41C7-BA80-817B0EA6BAC0.jpeg
    6019D875-2E00-41C7-BA80-817B0EA6BAC0.jpeg
    163.5 KB · Views: 36
  • D9DC83FF-D049-4559-974F-72104C3F65DC.jpeg
    D9DC83FF-D049-4559-974F-72104C3F65DC.jpeg
    123.9 KB · Views: 36
  • E0444BED-A7B7-47F7-A7AD-AC38BECD0A4B.jpeg
    E0444BED-A7B7-47F7-A7AD-AC38BECD0A4B.jpeg
    159.9 KB · Views: 33
  • 83E38269-D6B1-4401-8F23-25DCF80006A8.jpeg
    83E38269-D6B1-4401-8F23-25DCF80006A8.jpeg
    184.8 KB · Views: 34
  • 3AA497CA-12C1-439B-9079-16DC3708E6EE.jpeg
    3AA497CA-12C1-439B-9079-16DC3708E6EE.jpeg
    140.9 KB · Views: 33
I can't see any degree wedges between the leaf spring and axle. These are often installed to adjust the pinion angle when a lift is installed (you have a lot of lift with your SOA set-up). If anything, it seems that going with shorter, stock-length (or close) shackles would do nothing except help your pinion angle. You may just want to double-check the pinion angles vs. the same respective angles on the transfer case yokes.

Craig
 
A little more history and pics would help in suggestions to your questions.
As Craig pointed out that is a SOA conversion on the suspension.
Are you planning to get to a more stock height on the overall lift on the vehicle?
You mentioned removing a body lift as well, what size tires is it currently set up for and what are your future plans?

BTW, welcome to the BEST resource for CJ8's.
 
Since your front has a shackle reversal, wouldn't shortening the shackles actually hurt castor though? It probably wouldn't be much, but I would get a castor measurement before making any changes. The rear shackles look stock to me.
 
A little more history and pics would help in suggestions to your questions.
As Craig pointed out that is a SOA conversion on the suspension.
Are you planning to get to a more stock height on the overall lift on the vehicle?
You mentioned removing a body lift as well, what size tires is it currently set up for and what are your future plans?

BTW, welcome to the BEST resource for CJ8's.
That is what I was afraid of. The SOA would cause an issue. I guess my best best is to revert back to stock configuration and go from there. or are there advantages on the SOA outside of lift? I just bought this 8, so learning. Means yes I was to lower it a bit. The buddy and the SOA are a lot. I am all ears to suggestions Thank you
 
Last edited:
Removing the body lift will be easiest and fastest thing to do. I would start with that.

What size of tires are you running? Are those stock axles? I see the spring perch on the bottom of the axle on the drivers side in one of the pictures. If it were me and you are running 33" or smaller tires.... I would go back to spring under axle with some 2.5" lift springs. You will not really be able to lower it with the current SOA as the leaf springs are nearly flat.

For the shackle reversal some love them, some hate them. I don't love them but I also wouldn't necessarily revert back if your only goal is lower ride height.
 
Removing the body lift will be easiest and fastest thing to do. I would start with that.

What size of tires are you running? Are those stock axles? I see the spring perch on the bottom of the axle on the drivers side in one of the pictures. If it were me and you are running 33" or smaller tires.... I would go back to spring under axle with some 2.5" lift springs. You will not really be able to lower it with the current SOA as the leaf springs are nearly flat.

For the shackle reversal some love them, some hate them. I don't love them but I also wouldn't necessarily revert back if your only goal is lower ride height.
ok. I think that is where I will start. I do think if I remove body life it will look much better. Thank you. The tires are 35’s….ok check list of items I’ll need to be aware when removing the body lift. and please correct me.

steering shaft
radiator hoses
gas filler hose ( shorten)
new rubber body mounts.

once I do this, I’ll look into the SOA and see what I should do next. I do agree with the pinion angle, I am not sure about the wedges. I need to research that…..

thank you guys!
 
Other than tire fitment; you might be happy as it sits just removing the body lift without really needing to do anything doing anything else. Is the rear SOA? From the pic, rear spring does not look like it has lift.
 
That looks like a 1" body lift, which by itself is not a bad mod. I don't think you'll notice much difference by removing it though, since it's stacked on top of a 6"(ish) SOA lift.

The good news is, the 1" body lift probably didn't require changing the hoses or steering shaft. You'll just want to unbolt the fan shroud and radiator, and re-bolt them in the original mounting holes after the body is lowered back to its original position.

Welcome, and have fun! :cheers:
 
Back
Top