• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Looking for dash board scheme

AvigdorAharon

Basic User
City
Barkan
State
NA
Hi,

I am new here, I own Scrambler. I want to replace the dash board (I have
something very old and ugly...). Can some help me to find the dash board
scheme (dimensions, holes, etc)?

Thanks,
Avigdor
 
Avigdor,
Welcome! Can you show what you have now? Pix? What do you have available to work with there in Israel? Then we can give some possibilities.
Paul
 
Plenty of after market replacements...

There are a bunch of aftermarket dash replacements with the holes already cut...Made from everything from stainless to aluminum treadplate...No sense reinventing the wheel, unless you just want something custom...I have a factory dash out of a CJ that's in decent shape if you want an OEM replacement.
 
First are you from ISRAEL, like in the country, If so please post some picture of the Scrambler clones made by the Israeli defense contractor. That would be a great gift that we would like to see.

If your question is how to make a clone of the factory dash. it may be on this link

http://www.geocities.com/cantwait_forviolence/image_library.html


Second your question is equal to asking what Color it should be, the skies the limit personally I put a dash panel out or a boat in mine. This was easy because all of the gauges where pre-wired.

Autometer offers some kits of gauges that can be place on the blank dash.
 
Might be pretty hard for him to get it shipped to Israel however.

I do not think that Rogers trucking will be making that trip soon:) ,

Not that I would mind it, just do not think that my truck would float.

However I bet there are a few arround here with a autocad file version of the cut-outs. Maybe the guy with the overlander. I really like his dash and he had it custom made for him out of Stainless.

Carl
 
duffy ladd was making some awsome dashes ....but he wanted 800 bucks..:eek: i have actually thought of making some up...just dont have time right now...maybe next year....
 
Hello all of you!

CBRogers said:
However I bet there are a few arround here with a autocad file version of the cut-outs. Maybe the guy with the overlander. I really like his dash and he had it custom made for him out of Stainless.
Carl

This exactly what I need, a file version of the dash (prefer at pdf but autocad will be O.K as well).
I do not care about the type of the metal. It can be aluminium, SS or just 1mm still, I want to have the scheme to go and ask for price quote for the cutting work.

My Jeep is the long version of the CJ-6, here it called CJ-8.
I think it is the Scrambler in the US, am I right?

Here is one picture, I will try to have some pictures of my dash.

Thanks,
Avigdor
 
Try a search for Stainless steel jeep dash on ebay there is a guy out of Pa making them. If he cannot ship to you. He might sell one of the comupter files to you for you to have it cut over there.

Carl
 
round wheel well

Avigdor,
Welcome aboard! Your jeep looks like a cj-8 except it has round wheel wells in the rear. What year is yours?
 
Do a search on this board for dashboard. I remember a pretty lengthy posting from a couple of years back that included pictures of a few alternatives.

Later, Ken
 
ibscrmbln said:
Do a search on this board for dashboard. I remember a pretty lengthy posting from a couple of years back that included pictures of a few alternatives.

Later, Ken

still searching. I find out some pictures, with out dimensions.

Avigdor
 
AvigdorAharon said:
still searching. I find out some pictures, with out dimensions.

Avigdor

I am not quite sure what dimensions you need. I did my custom guages by creating an overlay on the original dash. It was made to be larger than the holes I wanted to replace and withing the holes I wanted to leave. I arranged the holes (new guages) in a pattern that pleased me at the time.

The size of the holes and distance between them depend on the guages you select and your preferences. I selected 2.5" and 4" AutoMeter guages that I purchased from either Jeg's or Summit Racing. However, I am not sure now of the exact hole size - would have to remove the dash to measure and that is not an easy task.

Like everything else, if I had it to do over again it would be different.

Later, Ken
 
ibscrmbln said:
I am not quite sure what dimensions you need. I did my custom guages by creating an overlay on the original dash. It was made to be larger than the holes I wanted to replace and withing the holes I wanted to leave. I arranged the holes (new guages) in a pattern that pleased me at the time.

The size of the holes and distance between them depend on the guages you select and your preferences. I selected 2.5" and 4" AutoMeter guages that I purchased from either Jeg's or Summit Racing. However, I am not sure now of the exact hole size - would have to remove the dash to measure and that is not an easy task.

Like everything else, if I had it to do over again it would be different.

Later, Ken

Would you mind posting a pic or 2 of your dash? I'd like to see how the gauges look.
 
jscherb may be able to help you out. send him a PM.

there is also a guy on ebay...logan's metal or something...that may be able to help you out as well. after much, much, much consideration i'm pretty much keeping everything stock looking. new multi-guage but adding in newer autometer volt/temp as well as a tach. now i'm on the look out for a stock radio...

it never ends. :rolleyes:
 
Back
Top