• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Manifold breather question

What motor and how many miles/how old is it?
If the filter is saturating with oil and dripping on the valve cover, it means your engine is not venting properly or is pressurized beyond venting capacity which is a bigger problem.

Make sure your PCV system is working properly. That system should be removing the pressure and vapor that is saturating your filter and making the mess.

If it is working properly that means you may have a leaking head gasket or a ring problem allowing blow by from one or more cylinders. You can check compression, water and oil to look for signs of these problems.

If it is a gasket or blow by causing your problem, anything you do will only be a patch and it will continue to get worse until you fix it.
 
Dumb question but is there a baffle plate on the inside of the valve cover to deflect the oil?
 
Hi guys. Thanks for the quick response. It is a 258. It's currently in the shop so I will have them check the PCV system. Since I don't know how to do that it might be easier for them to check it. I am not sure about the deflection panel. I will also have them check on that. It is a brand-new manifold cover so I'm not sure if it came with one or not. For future reference, how would I go about checking the PCV system to make sure it's functioning correctly?
 
re: manifold breather, yeah, they do that. So do the old school road draft tubes. Are you using an aftermarket cast cover or the factory steel stamping/plastic valve cover?

re: pcv check: Pull PCV from valve cover. Shake it. If it rattles, it's good.
 
Back
Top