Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Need more info.... Street only? Off road too? If so how much/hard. Longer shackles are typically ok only to generate small amounts of lift.
Spankys build he did a very careful writeup and used RE-4.5 (I think with 1" body lift) and tried 35's (BFG mud terrains - which measure small) but couldn't make it work without rubbing..... I think this is pretty typical. He ended up going to 33's and it worked well.
Big walton is running 5" BDS with 35's and I gather it just barely clears....
I'm sure the 35's would work with 3.5 spring over....but that's another bag of worms.....
I used to run 35s with a 4 inch SUA lift and 1 inch body lift. I also had TJ flares which gave me several more inches of clearance at the back of the front wheel well. I still rubbed inside the wheel wells at full flex, but nothing that I ever felt would cause any damage.
Probably not much help to you but it is a reference point: I run an SOA using Rubicon Express 1445 YJ reverse eye springs, a 1" body lift and slightly longer Curry grease-able shackles. Ground to front bottom of wheel well : 46 1/2". Ground to rear bottom of wheel well: 45 1/2"
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.