• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Need ideas and guidance.

caryt

New member
City
Wellington
State
NV
Ist I need any all pictures or write ups on the hardtop to windshield attachment methods used originally or mods to mount using some other method than original.

I have the original windshield and door hinges mounted correctly and my gap is much worse than expected so looking at someway to pull back the windshield tight .
 

Attachments

  • 20211024_120814.jpg
    20211024_120814.jpg
    98.4 KB · Views: 24
The inside bracket/tabs are adjustable, may have to loosen the 2 bolts on each and pull back on frame and retighten, a second person is helpful.
 
Sorry yes I have those.

View from the top with windshield strapped back showing the cage.
Yes the Hardtop will clear the cage.
 

Attachments

  • 20211024_125050.jpg
    20211024_125050.jpg
    102.3 KB · Views: 15
Can you put the hard top on. Then pull the windshield frame into place so the windshield edge fits into the hard top. If that's in place you can try to adjust the doors. Do you have a new windshield gasket. Many are too stiff (thick) and don't allow the windshield frame to pull back into position. In that pic it kinda looks like the door is too high (curve of vent window of door at straight edge of windshield frame). Probably my failing eyes. Get the hard top, then you can judge the door better.
 
Looks like gasket as well. Door shot shows how much the gasket is holding the windshield out.
 
Straps off
Pulled tight with bottom bracket tight, door opens and closes perfectly and gaps are good.
Can't lower door any more its close as it is. Maybe its got to go up to get even margins to the top as their are gaps now

Top doesn't have the new gaskets on just old ones.
windshield seems to fit tight to the top but IMO doors have to go way up?
 

Attachments

  • 20211024_143154.jpg
    20211024_143154.jpg
    136.6 KB · Views: 18
  • 20211024_143219.jpg
    20211024_143219.jpg
    134.4 KB · Views: 19
  • 20211024_143238.jpg
    20211024_143238.jpg
    152.2 KB · Views: 18
I'll have to address what is causing the top of the door area sitting high..
What methods are there to attach the top to the windshield.

I've seen a picture of the Rally top clamps but not how they attach..
""""""""""""""""""""""""""" GR8Tops"""""""""""""""""""""""""""""""""""""
A picture of what is supposed to be the original way..just a full width piece of metal that attaches to both the windshield and the top.

Any pictures of above or other options...its doesn't have to be original as very little is stock.

Thanks
 
Back
Top