• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

New steering column

trust

PITA
City
White Rock
State
NM
The pice that ties the column lock to the rod to the actual switch has broken in my column, other than that its still nice and tight, its a tilt and is solid. I know I could tear it all down and rebuild it myself probably, its been this way better than a year though so Im not seeing it happening soon. Is there a good source for a solid, reliable, affordable rebuilt whole column? I remember seeing a place a year ago but cant remember the name and google isnt finding it now. Im just not into spending 500 bucks to replace it when my HF vise grips work fine...

thanks
 
The pice that ties the column lock to the rod to the actual switch has broken in my column, other than that its still nice and tight, its a tilt and is solid. I know I could tear it all down and rebuild it myself probably, its been this way better than a year though so Im not seeing it happening soon. Is there a good source for a solid, reliable, affordable rebuilt whole column? I remember seeing a place a year ago but cant remember the name and google isnt finding it now. Im just not into spending 500 bucks to replace it when my HF vise grips work fine...

thanks

This is who I used, but I imagine it's outside the price range you're looking for:

http://www.columnsgalore.com/SCG542.htm

I'm by no means an expert, but I have half torn apart my old tilt column and it seems like it would be a lot of work to truly rebuild one by changing out all the wear parts top to bottom, so I find it hard to imagine you could get it much cheaper.

The parts to fix your specific problem are plentiful and cheap, so just a repair would certainly be the cheapest way to go.

Good luck in your search!
 
Anyone use an IDidIT or Flaming River column? Any thoughts on quality of those?
 
I've got flaming river in the cj7 and the cj8 I'm building now. Only problem I notice is if you use the steering wheel to pull yourself into the cab (have 33" tires and 4" lift). It has enough movement that you can feel the tilt slip. If your in the seat and give the steering wheel a sharp jerk down the tilt slip a tooth or two. Stock columns I've never seen this happen.
 
thanks gents, I looked at both Flaming river and I did it, both were about 2x what a rebuilt would cost so i didnt continue to consider them as options. Looks like a rebuilt stock unit is 4-450 regardless of who does it, fortunately I have a couple of cores besides the one still in the Jeep.
 
If you have a core to rebuild (and have time to do it), that's probably the best option.

I went with a $450 ebay column, and I am very satisfied... but I could have done just as well rebuilding a good core.

Good luck! :thumbsup:
 
I had heard some of the parts are obsolete for the internal shift bowl and tilt parts for these, even tho they are GM and that is driving up the prices of the rebuilds.

I have 2 good tight tilt columns to sell, but unfortunately they are both automatics.


 
How hard is it to put in an automatic column into a Jeep CJ that was originally a standard and that now has a Chevy 350 and a TH350 transmission? Any idea? I'd love to get the big shifter box off my floor and get some more room. Anyone do this?
 
I've got one set up like exactly that here. The PO used a cable type adapter from the bottom of the column to the trans. I believe they sell a kit for it. It works on the one I have tho cause the 350 is non overdrive. I assume to make it look factory with an OD trans you would have to just know where the gears are by feel as they wouldn't be the same as the indicator.


 
Pretty sure Ididit makes a cable that would work. That's what I'm planning on using if I ever get into swapping in an automatic on my green '7
 
Yep been using it for years. I got a longer cable as i had to clear my exhaust and better routing.
 
Back
Top