• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Nice Looking Seats

I bought a set of the Icon seats a couple months ago. They are a great seat at a good price. I ended up not using them because it raised the seat height to much for my liking. I could hardly get my legs under the steering wheel as I do not have a tilt wheel. My head was almost above the roll cage as well. I'm guessing it raised the seat height 2" +. Those may not be an issue with your set up thought I'd let you know.
 
Hey thanks for that. i was told by the guy that it was bolt-in for the CJ's but forgot to ask about the height issue.
I am a short 5'9"-5'10" with short legs and a tilt. In your opinion do ya think these would work for me?
These look like the same dimensions as the MC Rubicon, wold you know if those add the height 2"?
I wonder if there is any height differece with their other models?
Anyone else had experience?
Thanks for chiming in again!

Duff
 
Last edited:
If you have a tilt wheel you will probably be OK. Find something that is 2" thick and put it on you seat and sit on it. Also something else to be aware of is my passenger side has a tilt forward riser and the drivers side is a stock (I think) stationary riser. The tilt forward risers are about 1 1/2" higher than the stationary ones at least that's the way it is in my rust bucket. So the passenger side felt way high. I ended up buying a set of Corbeau "Moab" seats. Still the height issue but not as much.
 
Thanks for the advice

I have the same tilt forward passenger, and again I did not think to add that in. Guess the price was looking that good along with the fact that my current black vinyl seats burning the crap outta my legs this summer made me want to jump on these.
I'll try the 2" cushion out and see if its do-able.
I appreciate the prep talk on these Hunsakers. Where did you get the Corbeau seats?
 
I bought mine from Tera Flex in SLC. Here's a picture. Again these also added seat height but not as much. Because the passenger side riser is taller I ended up not using the sliders on that side.
 
Ok that picture came through way small, lets try a little bigger.
 
Grey Fox... How much space is there between your two front seats for a console? (I'm assuming you have a stock CJ tub, seat risers, etc.)

What is the widest console to fit at the narrowest space:
a) without smashing the seat side a little bit
b) with smashing each seat side a little bit?

I"m wondering if a stock CJ console would fit.

Thanks,
Jim
 
Jim, There is 9 3/4" between seats. Tub is stock. So a 9 3/4" wide console would lightly touch. The sides are vinyl and the foam is very firm. Not sure you would be happy if it were a tight fit. Good Luck
 
I have a Tuffy steel console right now between some Leon Rosser replicate high back buckets. My seats measure out at 21", same as the Hunsaker models and fit perfect.
I put a couple of inches of padding on my seats to gauge the hight difference with the tilt steering and I can notice the height difference. Since I have the auto trans. I don't think it'll be too much of a bother if I do the swap with any of their seats.
BTW, if there is any interest from any of ya'll for some seats and harnesses maybe we could work on a group buy????
 
Back
Top