• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

OEM soft 1/2 top installation question

USCG_Diver

Just Emptied Every Pocket
City
Norfolk
State
VA
Has anyone installed an OEM 1/2 top? I picked up a sweet denim blue 1/2 soft top and doors with all the original mounting hardware and storage bag, including the middle bow. The side support bars are square....is this for hard doors or both hard and soft? I also have the mounting hardware and bows from a Kayline or Whitco top and hope they migh work as well as it is a simpler set up. Does anyone have any tips or a pattern for mounting the snaps?
 
I dont know about the hardware but as far as snaps go ive put on at least a thousand full canvas kits on boats .My sugestion would be to put the top up with all bows and such then let it set in the sun for a while to get it warm and all the wrinkles out ,then start with the first snaps on each side next to the door so that they are in the correct place for door fitment ,then go and do the very center snap on the back and work your way around each side.hope that helps you out
 
The hard doors require a rounded upper side bracket that matches the hard door curve at the top of the glass.

Additionally, I suppose that someone could pull measurements on their soft top snap locations, but I don't know how accurate one could get with that information.
 
Thanks for the feedback guys. That helps me out. I'll have to wait to get it back from the shop to mount the top. I'll have to try both hardware set ups and see which works best. The OEM set is made of square tube aluminum and has twice as many parts as the Whitco set up. It'll be a weekend of experimentation.
 
Back
Top