• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Oriental Red Original Paint refresh with NOS

Never thought I'd see someone wax their floor boards. Looks nice though? :)
 
Drivers side floor has paint rubbed off.
Not sure if I should POR15 black or paint Red ?
Or leave alone and just polish and wax the bare metal ?


Leave it alone and just polish an wax bare metal!!!!!!!!!!!!!! :fingerscrossed::popcorn::fingerscrossed:
 
2nd Jeep polished

Never thought I'd see someone wax their floor boards. Looks nice though? :)

This is second Jeep that I've polished & cleaned to the max. :crazy:

Floorboards are easy, the underhood and bed are hard.


photo450-1.jpg


Check out that awesome original paint tailgate!!
So far...I've just polished & waxed the tailgate and behind where the spare tire reinforcement brackets mount.
Rest of bed will be couple days of work.

photo1751-1.jpg


I'll take pics of drivers floorboard before and after polishing & waxing.
 
Nos

NOS Flares, wouldn't U just know it, have pair & spare (3 Scrambler rear flares) and passenger front .....but missing drivers front flare. :(

The 82's original flares are nice, so I'll reuse the drivers front until I can find NOS.

The thin reproduction flares have a plastic glosssy shine and also don't fit contour of lower fender.

photo1637-1.jpg


Been looking for this NOS defroster duct in my mess for weeks so I can proceed with dash & radio back together.

photo1816-1.jpg
 
Lighter - "light"

Here's a trick that I learned from Tommy (Jeep Addict).

Notice the "light" on bottom of pic.

Really a great factory type upgrade to CJ interior.
No fumbling to plug in the hot lighter back in ... or the I phone charger into the hole.

The lighter base on left is CJ .... the one on right with cutouts for the light... is for a FSJ.

I tapped into a dash marker orange wire so the light can be dimmed.

photo609-1.jpg
 
Slacking

Picked up the brushguard & winch kit and tire carrier from powder coat, got them done in 60% black.
Paint is a little more shiney than semi-gloss but not plastic looking like full gloss sheen.

All the parts look incredible.... perfect...I think it looks like Jeep SE CJ OEM.

Been too nice outside to stay inside shop....so I haven't got much work done lately.

Have been doing some parts digging and found the trail tamer shocks.
899 7422 fronts are correct for Scrambler WT
899 7148 rear are correct for 72-81 NT CJ so we'll see if they fit WT.

I didn't take picture of the Jeep Trail tamer decal, notice that the shocks have part number that supercedes the Jeep SE part number.

I wonder if they had them specificially valved.

photo2049-1.jpg


photo408-1.jpg


photo1075-1.jpg


photo843-1.jpg
 
Last edited:
Trail Tamer Sticker

Your post reminded me I might have had a set of these and took a picture of the sticker way back then....

So yeah, way back, June 2002 (when digital cameras the standard picture size was this!) I installed a set of these on just some ordinary CJ - wish I had these now! :crazy:


DSC00029 by jerseyjeeps, on Flickr
 
I am assuming he is taking advantage of the good weather in texas...inside scrambler work can wait till later :smokin:

Seriously. it was one of the hottest and dryest in Texas this year, and time to enjoy these better temps.

In NJ, we had an early 14" of snow before Halloween :shrug: but still I have been outside alot and away from the Jeeps getting the outside work and winter prep done.
 
Slacking

It's been a week? What's up.:shrug:


Definately been distracted by kids Haloween & Deer hunting.
The top is off and weather is perfect, but Jeep is apart.

Did drag the pressure sandblaster outside and blasted old paint off the mirror and bed bolts.
Nothing like sand in your ears and eyes..... after falls out of hair while sleeping.

Have most of the wood rail hardware....Figured out I need 2 of the wood rail bolts where mounts to roll bar.

Also got this beautiful radio installed.

photo1888-1.jpg
 
German buyer



Renegade Garage from Germany put his bid down early, didn't think I would win that auction, although I set bidding service high.

Ended up winning the much needed NOS flare....IMO .... very inexpensive. :woot:


Now I have a complete set of nice patina used OEM flares to trade.
 
Understatement

NOS Hoarder! :D

That's a big understatement.... digging thru stashes & eBay to find/ keeping parts for 6 different Jeeps is almost a full time job.


Well the drivers flare came in, and it is deformed. :(

Not from shipping, but from storage.

I'm going to try reforming with heat gun. :fingerscrossed:

photo407-1.jpg
 
Back
Top