• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Other than a spare tire, what have you mounted on your oem rollbar spare carrier

GreatCJ8

Charter Member, 1st SOA Secretary
SOA Member
City
Lynchburg
State
VA
Pics too plz 😁
Trying to decide what to mount there, eventually.
I'm thinking either a full size spare or a Jerry can.
Will an oem rollbar carrier take a 33.12.5.15?

I may also incorporate an antenna mount for my ham radio~ but not with a gas can 🤯
 
Last edited:
No spare carrier, but I kept the factory roll bar and adapted it to my needs.
Rock hard family cage, '88 YJ spreaders from roll bar to windscreen frame, shoulder belt anchors and then a full bikini top. Spare is mounted on a rear rack.
 

Attachments

  • 20200409_185822.jpg
    20200409_185822.jpg
    79.3 KB · Views: 18
  • 20200409_185041.jpg
    20200409_185041.jpg
    65.2 KB · Views: 17
Last edited:
No spare carrier, but I kept the factory roll bar and adapted it to my needs.
Rock hard family cage, '88 YJ spreaders from roll bar to windscreen frame, shoulder belt anchors and then a full bikini top. Spare is mounted on a rear rack.
is the family cage tube diameter the same as the factory roll bar?
 
is the family cage tube diameter the same as the factory roll bar?
No, sadly. If I'd had access to the tubing and a decent bender I'd have made one of the same diameter. However, it's the same size as the spreader bars and I'm generally happy with the results. I do wish Rock Hard had bent the rear bar to more closely follow the body lines rather than simply straight up. It would have been easy for them to do it and made the whole thing far better and easier to attach shoulder belts to.

Such is life.
 

Attachments

  • 20200409_184943~2.jpg
    20200409_184943~2.jpg
    90.4 KB · Views: 12
Not sure if it is visible in this pic, but the silver Scrambler next to mine has a rotopax mounted on it. The mount was made for it and lines up with the bolt holes perfectly
 

Attachments

  • 57FC2851-63D1-4859-A888-AEB2C01C20FB.jpeg
    57FC2851-63D1-4859-A888-AEB2C01C20FB.jpeg
    236.5 KB · Views: 23
Not sure if it is visible in this pic, but the silver Scrambler next to mine has a rotopax mounted on it. The mount was made for it and lines up with the bolt holes perfectly
I didn't know that you could get vanity antique tags in VA, good to know 👍
And yes, I see the rotopax, nice! Thanks
 


I like it.

Back when our scrambler was used to duck hunt, Dad bolted a 2x10 to the rollbar mounted spare, and used it to clamp his 5 HP outboard onto going to and from the duck club.

I had @1x1speedcraig here make a custom bumper with bumper mounted swing out spare carrier years ago, so the rollbar mounted spare carrier isn't used anymore

You can't even get a 30" spare on the factory rollbar mount without using a spacer.
 
I plan on using the holes to mount my Hi-Lift Jack. Just need to make a bracket.
 
This is how I mounted my high lift Jack. Very simple, and very secure.
 

Attachments

  • C5F8E4E6-B583-445C-8B6D-2771D3C1BEC5.jpeg
    C5F8E4E6-B583-445C-8B6D-2771D3C1BEC5.jpeg
    116.5 KB · Views: 12
  • BE2D79BB-7A1A-48CF-A701-9B705B14AE15.jpeg
    BE2D79BB-7A1A-48CF-A701-9B705B14AE15.jpeg
    103 KB · Views: 12
Here’s a better picture of the foot of the Jack. I cut the head off of a bolt, bolted it to the bottom foot of the rollbar so that there is a stud sticking out that slides into an existing hole in the foot of the highlift Jack.
 

Attachments

  • 269FB8AB-1B47-4777-B6E4-8CDBEA7FA9FB.jpeg
    269FB8AB-1B47-4777-B6E4-8CDBEA7FA9FB.jpeg
    136.5 KB · Views: 17
  • 84BF3D0B-AC5C-4CD2-BD96-7C0BE527B932.jpeg
    84BF3D0B-AC5C-4CD2-BD96-7C0BE527B932.jpeg
    123.1 KB · Views: 17
  • 65187D65-60A4-45CD-A2B5-FDEA6EF6D0ED.jpeg
    65187D65-60A4-45CD-A2B5-FDEA6EF6D0ED.jpeg
    141.3 KB · Views: 17
Back
Top