• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Painless CJ Wiring harness

Shrek

Active member
Lifetime Member
City
Saint Francisville
State
LA
I just finished the install of the Painless 21 circuit harness on my CJ7. I know it is not an Scrambler but it is the same harness. I thought I was finished, it would not stay running after I let go of the key in the run position. After reading the manual several times and reading the instructions that came with the Duraspark II harness and much pondering I gave up and called Painless. After 45 minutes with them on the phone (great guy) we figured it out the two #920 wires which are red with a white stripe and the red with a green stripe no number have to be connected and it will give the proper voltage to the run circuit. One of the #920 wires comes from the Duraspark box and one is in the main harness. The other red with green stripe is in the Duraspark harness. Other than that the harness was painless.
 
I struggled with the same part of the install on mine. I had the added complication of TFI ignition upgrade and the Howell fuel injection system wires as well.
 
For the TFI ignition and Howell the manual stated what to do but for the other said nothing about the red/green wire.
 
Thanks for the report! I will be ordering one soon. Did you find a discount anywhere?
 
Several years ago when I got mine, they were doing a manufacturer rebate over the summer. I'm not sure how often it gets offered.
 
Back
Top