• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Power steering box for 35s

AdamH

Scrambler Junkie
BENEFACTOR
Gold Member
Lifetime Member
SOA Member
City
Surf City
State
NC
its time to replace the original steering box on my Scrambler. I searched and read through various threads and still didn't get a firm understanding of everyone's experiences. Seems that AGR isn't worth the money so would a Crown unit work? Also noticed folks using Durango or H1 boxes if they can find one.

running 35s (and a 304V8 if that matters).
 
Last edited:
I have an AGR in mine with no issues at all. I also have used quite a few Howe boxes on projects lately and they can custom taylor them to your needs be it larger tires, more or less "feedback" or assist, etc........
 
I am going to ask a dumb question- what makes it time to replace it? Leaking? Excessive play?

Reason I ask is my high pressure ps hose developed a pin hole leak this week (what a mess). It sounds like pulling the radiator and/ or dropping the steering box is what most people recommend. While I am changing out this hose, wondering if I should be looking at other preventative or long term needs- steering box, bracket etc. I am running 33’s.
 
I have an H1 box and am happy with it. I appreciate the variable rate steering more than I expected. I put it on as part of a steering overhaul (replaced everything from ball joints to column bearings), and I think it drives better than new.
 
If it’s for street use stock is fine. Have 35s on my Scrambler. 35svon my CJ5 also
 
I am in the same boat. As anyone used the crown HD column that replaces the coupler with a U joint? I woudl like to add the HD box mount, new box, HD shaft, and column bearing all at the same time. I also have a new tie rod bar and will be getting new tie rods, an alignment, and tire balance. Hoping all of those updates will keep the wheel from shaking out of my hand!
 
I keep reading the J20 is a good option but requires a manual coupler. they are $120 at autozone "refurbished"
 
Depending what year of J20, you may also have to convert the hose fittings. (they switched in 1980 from SAE to metric threads with an o-ring.
 
I am in the same boat. As anyone used the crown HD column that replaces the coupler with a U joint? I woudl like to add the HD box mount, new box, HD shaft, and column bearing all at the same time. I also have a new tie rod bar and will be getting new tie rods, an alignment, and tire balance. Hoping all of those updates will keep the wheel from shaking out of my hand!

The Borgeson shafts are very good. You would have to paint them because they come unfinished.
 
Thanks and sorry for hijacking your post OP. I checked for awhile last night and can't find any of the cardone H1 pumps in stock. There are some reman ones but I am always leery of those... I would assume the AC delco will also fit since its an H1 but I cant find any threads on any form with anyone using that one. I also don't know if they will take my core for the core charge. I think by the time I get done with shipping my core back i will be into this for over $300.
 
its time to replace the original steering box on my Scrambler. I searched and read through various threads and still didn't get a firm understanding of everyone's experiences. Seems that AGR isn't worth the money so would a Crown unit work? Also noticed folks using Durango or H1 boxes if they can find one.

running 35s (and a 304V8 if that matters).
96 Hummer H1 box bolts right in bigger piston & variable ratio & high flow pump works awesome
 
96 Hummer H1 box bolts right in bigger piston & variable ratio & high flow pump works awesome
And usually I hear beside this is that they are hard to actually find in stock, people order them and then get an email saying they are out of stock and have there order canceled.
 
And usually I hear beside this is that they are hard to actually find in stock, people order them and then get an email saying they are out of stock and have there order canceled.
. Yes I had to wait 2 weeks got a lares brand worth the wait
 
Back
Top