• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Question re Scrambler Engine life

awlaird10

Legacy Registered User
City
Houston
State
TX
Does anyone have an idea of the typical life of a Scrambler engine if it's been well taken care of over the years? I'm seriously considering buying an '83 scrambler that has 120,000 miles on the original in line 6cyl engine, but I'm just not that familiar with their history of longevity. According to the seller, the vehicle has most all maintenance sheets and has been regularly cared for, so that's a plus. My only concerns are
(i) whether, at that mileage, I'm taking a big risk and might end up with a costly repair project (I'm ok with assuming some risk since I'm aware that any engine could break down at any point, just don't want to be taking too big a gamble...)
(ii) if the engine were to break down, what kind of cost might I be looking at for a replacement or a rebuild that has to be done by a third party?

Appreciate any insight you all might have. Thanks
 
Also, the jeep has been through a ground up restoration if that helps anyone in the thought process...
 
If the price is right, the engine is low on your list of concerns. What's your goal for the CJ - original, daily driver, crawler, etc. If you're just looking for a daily driver that is for the most part original, an engine swap in the future offers loads of possibilities. Can't help you with the cost of a rebuild, but I'd check with your local machine shop to see what a rebuild might cost you.

Mine made it to about 130K before it needed a rebuild, and that's because the PO ran it for a while with coolant mixing with gas.
 
Appreciate the quick response. Looking mainly for a weekend driver that will turn some heads, so likely wouldn't put more than 3500 miles per year on it.
 
The 258 I-6 is a very dependable engine. As long as the oil was changed and regular maintenance was done it should be fine at 120,000.
 
see if you can do a compression test of cylinders. That will give you a good idea what shape it is in. I think PSI should be between 120-150- the higher the better. :cheers:
 
Mine has 90K on the odo and needs a rebuild now. I have oil burning and fouling a spark plug. And i have some coolant mixing in. Good times. But I have a line on getting a swap done with an already rebuilt 82 258 for a really good deal.

I hear that these are dependable engines. Not sure what the PO did with mine, but it has not gone as long as I had expected. That being said, i am still driving mine every day. No major problems yet.

Got a quote of $2-3K for a rebuild. The swap is more economical for me.
 
My friend has an '86 CJ7 he bought new. He got 165000 out of his 258. He had it rebuilt and drove another 75000. He now has a 4.0.
 
Biggest issue with these engines is running rich on center cylinders and lean on the outside ends.

Often if they are too rich the excess fuel will wash oil from the cylinder leading to early ring loss and loss of compression on #3 an #4 cylinders.

If you end up running a MPFI these engines routinely got 300K. So if it was run with Carb with correct setting should be a good engine. Compression test will tell.



Carl
 
Mine had 165K on it. Compression was low (90-100psi). I swapped on a MC2100 carb and HEI. Thing ran amazingly well for the compression. Almost passed Utah emissions (probably would have passed with a new cat). I swapped to a MPI 4.0L, but would not have if Utah did not require a sniffer.
 
Thanks everyone. I bought my first Scrambler on Saturday and am going to look at it Wednesday. Will definitely have a mechanic run a compression test on it. Should get delivery of the vehicle in the next week or two and will post some pics. Seriously appreciate all the responses and insight...helped me a lot in my purchase. Very glad I joined this forum prior to taking the plunge
 
Thanks again everyone. Compression test ended up being over 140 on all cylinders, and mechanically the vehicle checked out on a used-car inspection test. Drove well also with no knocking or rattling. Vehicle to ship hopefully by the end of this week...I'm pumped
 
Mine made it over 200K before I rebuilt recently. Only to get additional performance out of it....

Got to add some pictures when you get delivery!!!
 
Back
Top