• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Ramsey winch question

flashover604

Scrambler Junkie
Lifetime Member
City
Lancaster
State
Oh
Hoddy folks.

So... Back when I had my 93 Wrongler I thought to myself "locker or winch"... In one of the better decisions I've made, I went winch. My reasoning was that lockers would get me farther INTO trouble, but a Winch could get me OUT of trouble.

Fast forward a dozen jeepless years. I've got my ole' trusty, dusty, not-even-rusty Ramsey REP8000 on the work bench. Ah, old friend. We've been through some crap. Seriously, it pulled my Thornbirded (see, BAD decision) 2.5L Low Output YJ out of a buddy's "swamp" that ended up being part dairy farm lagoon.

(On a side note... IF you ever get the chance to go wheelin' in a dairy farm lagoon.... Go jump off a cliff. It'll end up being a better experience. To this day I can tell you if we're driving past a BEEF cattle farm or a DAIRY cattle farm, purely by smell. I kid you not...)

Back to the task at hand... I hooked up the red and black cables to the corresponding red and black spots on the battery. I hooked the controller up to the control box. I pressed the button for OUT. The solenoid clicked loudly. The drum did absolutely nothing. I tried the IN button. Same loud click. Same quiet nothing. So, I did what any normal person would do at this point. I pushed both buttons again, several times, rapidly.

Nothing but clicks....

Unless I can scare the mud into submission with very loud clicks, I've now got a very expensive front spring compressor.

Any ideas?
 
I'm not sure how I forgot about the hammer procedure. You know I'm gonna try it. I'm thinking soft faced dead blow mallet... Might loosen up whatever is gunked up inside. THEN I'll take it apart...
 
Ramsey's tend to be a little slower than Warns, but they last forever, and they get you out! Buddy had one on his 79 CJ7 he inherited from his grandfather. That thing was slow, but it would PULL.

I'm guessing loose connection somewhere, or as said, tap on motor with a hammer and see if it's just seized.
 
Drop it on your foot. You will forget all about that minor electrical problem.
You have the brake off, don't you?
Hilarious description of the farm, BTW.
 
I am going to everything I can to NOT drop this thing anywhere near any body parts. Brake? What brake? I remember the selector for IN and OUT/FREEWHEEL, but as far as I know there was no brake... This is just a planetary 8000lb winch.

As for the farm... Man, that was certainly one stinky stuck. Black, soupy, never ending slime of a stuck. We had my winch line spooled out to a buddy's spooled out line. He was on solid ground. That poor yuppie jeep was COVERED in poop. Those stupid Thornbirds... They would throw that stuff all over the place, but they would not give a foot of forward progress. I traded the set of 3/4 tread 33" Thornbirds for a set of 1/4 tread BFG mud terrains and never looked back. Sayonara.
 
I am going to everything I can to NOT drop this thing anywhere near any body parts. Brake? What brake? I remember the selector for IN and OUT/FREEWHEEL, but as far as I know there was no brake... This is just a planetary 8000lb winch.

That's what I meant. You know...the thing that does the thing when you turn the thing....
Any progress?
 
Back
Top