• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Rear Drums Rubbing

Jeeperdd

CJ-8 Member
Member
SOA Member
City
Gordonsville
State
VA
Okay,

My rear drums are rubbing the sides of the brake shoes and backing plates... :(

Everything is new; seals, bearings, brake parts, brake shoes, drums. Like a brand new axle, except for the metal on metal contact...:angry:

Any idea's???

I though about a 1/16" spacer between the axle hub and drum... kinda geto though.
Maybe the axles bearings are pressed on to far???

HELP!!!
 
I ran into this problem with my 91 xj. Measure the width of the brake shoes and Compare to old ones. I bet you will fine the new ones are wider. Good luck!
 
Yeah, though about that. But the drums are rubbing the backing plates as well.
 
Did you replace the axle shafts? I had the same problem on a CJ7 I was working on after replacing a stripped axle shaft and the replacement shaft was about 1/8" shorter and allowed the drum to move inward. The difference was at the end of the shaft where it went into the differential. The original one was tapered and the new one was not. Oh, this was a stock AMC 20 axle.
 
Back
Top