• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Rear seat question

2K1TJ

Still Scramblin'
City
Rockmart
State
GA
I want to add a rear seat to the Scrambler.

I've searched and after readin 8 pages worth of threads I still didn't find an answer to my question.


Will a YJ rear seat bolt in just like a CJ seat? I prefer a fold-N-tumble type.

I ask this because it's harder to find a CJ seat in decent condition. Anybody done/tried this?
 
me too

yes, i to want to install a fold and tumble seat in back. i do have an old seat out of an 81-7 that is in good shape, but no hardware. let's hear some ideas please, thanks
 
YJ works

I have a YJ rear fold and tumble rear seat in mine. I used the stock mounting brackets from the YJ and it works great. I just got the rear seat belts (universal lap belts) for now until I build the full cage and then I'll switch to shoulder belts. I'll post close up pics in a few days cuz it is currently at the shop. For now here are a few shots.
IMAG0013sized-1.jpg

IMAG0014sized-1.jpg

IMAG0015sized-1.jpg
 
Did you have to drill new holes or did it fit in the original ones?


I like the side rear door opening, BTW. :)
 
YJ Seat

Yup had to drill new holes (never saw existing holes) for the YJ brackets. Plus I wanted to place the seat as far back as I could to allow rear passengers leg room. (Problem is that with the rear brackets that the seat clamps onto are mounted on the rear fenders so I was limited on how far back I could go.) I'll post close up pics asap. As for the rear door cut-outs....That was fabricated when it was setup for hunting. Instead of covering the holes back up I am currently fabricating mini doors instead. However, they will not function while I have my full soft top on (unless I have someone custom fabricate a soft op window to function) I'll post those pics on a previous thread (Full soft Top info) later...
 
On mine, there were reinforcing strips welded to the underside of the tub where the seat was to bolt (most people have holes and nuts there too but mine didn't). In fact, there were 3 strips, use the front 2 to have the seat in the same position it would be in a CJ-7 or use the rear 2 and it moves the seat back a foot or so...
 
Back
Top