• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Recommendation for brake line kit

CJocho

CJ-8 Member
City
CHICAGO
State
Il
Fellas,

I'm starting to put my Scrambler back together and need new brake lines. Can somebody recommend pre-bent brake lines? Also, anybody know where I can get a new proportioning valve. My brake setup is the stock 84 scrambler with front disc and drums in the rear. It does not have a brake booster. Thanks for all of the help.



-Alex
 
I have not used any prebent line but it would be a great time to upgrade to a power brake setup. There are quite a few setups on the market. Searching this site should find some comments on the various setups out there. The Navajo setup has been around and has good reviews.
 
I just ordered lines and a proportioning valve from inline tube on eBay. I also picked up a power brake kit from Morris. Total cost - $!80 for the lines, $40 for the valve, and $225 for the power brake kit.
 
Last edited:
Thanks for the recommendations. Forgive me if this is a dumb question but does anyone know the difference for stopping distance between having a power brake booster and not? Also, would the brake lines be the same for the power brake and manual (i.e. could I just upgrade to power brake booster later and not worry about having to change the lines as well)?
 
FWIW, I went with Classic Tube. They had pre-bent stainless lines. I was very pleased.

Yes, the brake lines are the same for power and manual. There may be some minor difference in the flare fitting at the M/C, but you can deal with adapter fittings or just re-flare when you upgrade. In terms of the stopping distance, I don't know if there's an actual difference, but having the booster definitely requires less stomping force.
 
Back
Top