• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Renewed Obsession

Have you thought about bringing back that paint? Looks like it would shine up very nicely! Just mentioning it before you continue to put things on that would ultimately be in the way if you work on the paint. Either way it looks great!
 
It’s a cheap repainting job, so I didn’t think about it. I have a buffer and I will give it a try. Can’t hurt ??
 
I I think o am going to get rid of the half hard top because with my son it’s going to be a while before he grows out of the car seat. I don’t want to store it either, so anyone looking for one just pm me and we can talk price (y)

In Connecticut if you only have a two seater you can legally have a car seat in the passenger side. I did this with my daughter when I had my CJ5 with no back seat and it will fine.
 
I was wondering about that, but I never looked into it. I ended up selling the hard top, so i can bring my wife and son for weekend drives now.
 
I did not like the stainless steel differential cover i have on the AMC 20. So i decided to replace it with something different. I like the look of the black cover with the contrasting stainless bolts. I took off the cover to inspect the 3.73 gears->
06EC251C-9919-488B-8110-1166EDF72B05.jpeg

everything looked good. The clutches are worn out but I can’t do anything about it in the garage. I will leave it for another day. I got a great deal on a OX cover and out that on ->
B2709F46-1161-4148-BBAC-2677D1812EB7.jpeg
Half the yellow OX reflective sticker came off with tape protecting it, so i just took it all off. Looks good IMHO. TBC
 
My Scrambler has the AMC 20 in the rear and when I put on the OX cover on I obviously had to drain the fluid. When I put in the expensive lube in it didn’t just leak out it drained out. Took out the axle ->
775B7C70-3A61-42F7-B8B7-65A702AC1A2D.jpeg.beabd084c353eea4c2827340db83b5ab.jpeg



Then I cut off the retainer and the bearing cage with a Dremel tool ->

2E107C6E-5569-404A-991B-038D53E6C2AA.jpeg.3dc1c16befda10dc2837488750146b2f.jpeg


I was then able to press off the rest of the bearing and remove the outer seal. Looking at the seal I saw why the leak is so bad ->

74ADF1F2-B8C0-4B2B-9535-60F6D8F96E04.jpeg.be087a5aec3bd33c0fdd186573aef91e.jpeg


I already have the new outer seal, so just waiting to get in the bearing, retainer and inner seal.
 
My Scrambler has the AMC 20 in the rear and when I put on the OX cover on I obviously had to drain the fluid. When I put in the expensive lube in it didn’t just leak out it drained out. Took out the axle ->
775B7C70-3A61-42F7-B8B7-65A702AC1A2D.jpeg.beabd084c353eea4c2827340db83b5ab.jpeg



Then I cut off the retainer and the bearing cage with a Dremel tool ->

2E107C6E-5569-404A-991B-038D53E6C2AA.jpeg.3dc1c16befda10dc2837488750146b2f.jpeg


I was then able to press off the rest of the bearing and remove the outer seal. Looking at the seal I saw why the leak is so bad ->

74ADF1F2-B8C0-4B2B-9535-60F6D8F96E04.jpeg.be087a5aec3bd33c0fdd186573aef91e.jpeg


I already have the new outer seal, so just waiting to get in the bearing, retainer and inner seal.

TBC - Rich
 
I’m back working on the Scrambler. I need to re-gear the font axle, so I am getting the axle free from the Jeep. Already have the carrier, gears and lunch box locker ready to go ->
 

Attachments

  • IMG_7243.jpeg
    IMG_7243.jpeg
    152.6 KB · Views: 3
Back
Top