• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Sending Unit-which one to buy?

rollbar

Legacy Registered User
City
Palm Harbor
State
Fl
OK, since I can't get the sender to test I am going to buy a new one.

Not sure which one to get and I'll have to specify the OHMs for sure w/AZone.

What would be your recomendation(s).

Thanks,
Jim

I looked in the 4wd catalog and they have one for a 20gal tank (of which I have).

Part number: Crown CR05362090
imagesashxi5362090jpgpartNoCROw200h200-1.jpg



AZone: Spectra
2


http://www.autozone.com/autozone/pa...counter=0&itemIdentifier=709587_127542_11219_
 
Mine came with the tank as part of the kit but I think it may be the one from Crown. No problems with it for 6 years except I broke the tube off the top of it about 2 years ago while removing the tank. I'm pretty sure my replacement was also from Crown. No trouble with it either.
 
So i guess the general consensious is that the crown model is the best replacement sending unit?

Thanks
 
Don't know if it's the best but it was what was available locally. Several months after installing it quit going to "full". It stops at about 3/4 tank. But it does work from there down to empty. Too much trouble to worry about what the problem might be.
Make sure the tube fits all the way to the bottom of the tank - may require a filter/sleeve,
 
Are ya'll replacing the float with a brass one prior to installation? Seems like replacement sending units have a reputation for leaky floats that eventually fill up with gas. People using the brass ford float don't have any problems.
 
I will be replacing the foat with a brass one before installation, in fact i have allready ordered the float.....I just need to decided on which sending unit to order.

Thanks
SC
 
Back
Top