Shackle Reversal and BDS Supsension

[83cj8]

Here is a picture I came accross from my initial jeep trip with the shackle reversal completed. It is a MORE shackle reversal and BDS springs.
The shackle reversal provides about a 1.5" of lift and I went with 3.5" springs in the front and then 5" lift springs in the rear. I also gain about
1" of lift from the MORE boomerang shackles. So, after it all settled in I have about 5.5 to 6" of lift. It is sitting on 33" tires in the picture.

There is plenty of room to fit 35" tires which are next.

I also did the tube work on the front end you can see.

Karl

 

[Karin77777]

Looks good!
I currently have a 4" BDS lift on my scrambler with a 1" shackle. I would like to put a reverse shackle kit on it, but I actually want to keep my 33's so I was hoping it might lower it a little bit so they will fill the wheel well more. If I put a stock height shackle and reverse shackle kit, what do you think that will do to my ride height? Does a typical reverse shackle kit lower or raise the jeep at all?

 

[83cj8]

The MORE shackle reversal kit will add 1.5" of lift to the front. You may be able to keep the rear springs and see if you can get a 2.5" BDS springs for the front as well as go back to the stick shackle height.