• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Steering Box Bracket Bolts

joshvt

Scrambler Enthusiast
Lifetime Member
City
charlotte
State
nc
I need to replace my power steering lines. Decided to put in a M.O.R.E steering box bracket while i am at it. I am having trouble getting the original bracket off. Two of the bolts that connect the original bracket to the box are tucked up inside the bracket and have a head that looks similar to a torx head. What are these? I can fit a 12 point 7/16" box wrench on them, but it's not a tight fit and I am worried I am going to strip them. These two bolts and the other two hex bolts connecting the bracket to the box aren't moving so far. Soaking in PB blaster... any advice on removing the bracket > steering box bolts?
 
They make a female version of the torx, (forgot their name). The 12 points can work. Best way is to have a torch and heat the nuts. Heat and cooling will do wonders on breaking them loose without stripping the heads. PB blaster helps, but the heat expands the nut and helps break the rust in the treads and under the heads. Then the oil can get in and do it's job.
 
Craftsmen, husky, kobalt, etc all make wrenches that are said to work on external style torx and pretty much any shape head out their. I have no experience trying them in anything but a "Normal" bolt or nut.
 
Funny- I was just at Lowe’s and saw the one size fits all wrenches. Didn’t look like they would have much contact other than at the points. Instead, i ordered a set of torx head box wrenches from amazon. I don’t think there is clearance for a socket on the innermost bolt
 
Completed steering bracket and install of new ps hoses today after slowly working on breaking all of the bolts free when I had time over the past week or so. Ended up pulling the radiator to get to the hose fittings.- can’t imagine doing replacing them with the radiator in place. The M.O.R.E bracket fit well and looks cool- good to have it back on the road and having those crusty hoses gone is nice. 422F642F-E9FF-47B3-9ADC-5E6F50DAFFF6.jpeg
 
Good to hear it worked out. I put one of those brackets on the cj7. Heavy duty bracket.
 
Back
Top