• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

The t5/dana 300 rebuild

Here's an update to the T5. Tore it down today and here's what I found:


The snap ring holding the 5th gear on the output shaft jumped it's track and allowed the gear to move to the point of not engaging the drive gear. I think I got all the terminology right on that one...

A few small metal flakes in the spline and this weird ring on the output shaft. Still engages and still works just fine once the snapring was reinstalled. Here's what the snap ring looked like. I flipped it over and retensioned it. Should be just fine. It's engaging its track pretty snug.


Here's the front bearing cap. It was leaking a little bit before disassembly. Ran out of time today so tomorrow I'm going to pull it off and see what the seal looks like.
 
Back
Top