• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Tuned it up but still have a miss...

Flatie46

Legacy Registered User
City
Russllville
State
TN
My DD '82 Scrambler with the 258 auto has developed a miss. 2weeks ago I installed new plugs, wires, cap, rotor. Last week ran a bottle of "HEET" in the tank to possibly remove moisture in the fuel and put half a can of "SEA FOAM" thru the vaccume line at the brake booster, the other half down the carb. It still has the miss. I would say it feels to me like a bad plug or wire. It's very noticible at an idle in gear. Going down the road, it seems to dissapear or at least is hard to detect. My next step I think is to buy the ignition box. I've heard it's common for them to go bad. I hate to just throw parts at it but so far it was due everything I've bought. Does anybody have any thoughts or suggestions? Oh I should mention the previous owner who bought it new installed a Jasper engine aprox 50k ago. Anyway thanks for any help in advance. Flatie46
 
Perhaps you should trouble shoot it a little bit before throwing more parts at it....
 
Thanks for the manual Rustycrawler, and your right. It's costly to just guess. It needed the wires pretty bad, plugs were ok, rotor and cap were well worn so that stuff will at least help MPG's.
Mysunnshine: I'm curious about the compression, that was why I ran the Sea Foam thru it. I was thinking maybe sticky valve or a chunk of carbon. I don't own a tester, probably high time I bought one though.
82CJ7: The carb I feel like probably could use a kit but it just don't seem like that kind of an issue.
JeepScrambler: I haven't put a gauge on it yet but I wouldn't doubt it having a vaccum leak, the vaccum hoses are pretty dried out.
Thanks for the ideas guys, it may be a couple days before I can tinker with it and see. Workin' long hours so it prob be the weekend before I get to see about it. I'll post my progress, thanks alot for your time.
 
When I poured the Sea Foam down into it, I was being careful not to spill it, taking my time then I happen to notice something creeping over the edge of the hood. I peaked around and looked down the side (or what I could see of it) and man the god awfulest plume of blue fog was rolling out of it.Lol I expected it to smoke an all but I couldn't believe it. Then a few mins go by and I'm thinking ok it's going to stop smoking anytime now...then I start to get worried and finally it cleared up. As thick as that smoke was I expected a dead animal to fall out the tail pipe or broken engine pieces to start falling out. Had me worried for a bit.
 
gusgoeshuntingfortroublenovember1953png-1.jpg
 
Back
Top