unknown one piece rear shafts in amc 20 with leaky seals

[BDCCLARK]

I've done some searching with very little luck.

I have zero idea what brand my one piece axles are and both are leaking.

I'm not exactly sure how to proceed.

Am I missing something here?

It seems that the different manufacurers use different parts in their kits.

I'm all ears for any advice and or direction.

Chris

 

[FLCJ8]

I've done some searching with very little luck.

I have zero idea what brand my one piece axles are and both are leaking.

I'm not exactly sure how to proceed.

Am I missing something here?

It seems that the different manufacurers use different parts in their kits.

I'm all ears for any advice and or direction.

Chris

Maybe some pics of the hub might help identify them.

Post #14 is interesting. may be of some help.

AMC 20 Axle Identification Help Please...

I have some Moser Axles I ordered to install in my AMC 20, I hadn't pulled them apart, but assumed it had the two piece axles. (I know what assume means and may have just proved it's meaning again.) I need to know if I already have 1 piece shafts and if so, what brand they might be...

jeep-cj.com

 

[BDCCLARK]

Maybe some pics of the hub might help identify them.

Post #14 is interesting. may be of some help.

AMC 20 Axle Identification Help Please...

I have some Moser Axles I ordered to install in my AMC 20, I hadn't pulled them apart, but assumed it had the two piece axles. (I know what assume means and may have just proved it's meaning again.) I need to know if I already have 1 piece shafts and if so, what brand they might be...

jeep-cj.com

I'll buy your dinner if we ever cross paths. In all my searching and reading for some reason I never found that link. Thank you very much. I'm taking it apart either tomorrow or Monday and we'll find out.

Thanks again!! This really simplifies things.

Chris

 

[BDCCLARK]

I bought the Moser kit and it worked fine.

I feel like these taper roller bearings must not require the utmost of precision. When the spacers must be ground to meet clearance requirements and most guys don't have access to a lathe.....

Thanks again.

Chris

 

[wm69]

So are the roller bearing axles and tapered bearing axles different? I have some Foote (Superior) axles, but they came loose with some other parts.

 

[BDCCLARK]

So are the roller bearing axles and tapered bearing axles different? I have some Foote (Superior) axles, but they came loose with some other parts.

From my most recent education and speaking with Moser, I think the axles are the same. I could be wrong. I believe the shafts that take tapered roller bearings are all the same.

Chris

As I put mine back together, I believe mine to have a slightly bent passenger side axle tube.