• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Whos is running a 4.3 GM V6? Anyone, bueller

Kane

CJ-8 Member
City
Berlin
State
ct
I was reading the Novak site like I do frequently and I read about the 4.3L GM swaps. I knwo they get pretty darn good MPG and the later years have good power. Anybody have one in there Jeep? The swap to my AX-15 is not that bad and I am GM guy at heart. I still have my 258 plans but this little motor intrigues me.
 
I had a 4.3 TBI in my previous Scrambler. It had the t176 and 300 behind it. I absolutely loved it! I would do it again in a heartbeat if my current 8 didn't already have a Ford 302 / C6 combo. It had plenty of power and those engines run forever.



 
Running a highly modified, carbed 4.3 in my Scrambler Substitute (Commando trail rig) and love it. TF999 with 4:1 Dana 300 pushing 39" military XZL's on Dana 44 axles with 3.73 gearing. My setup dinos 300 hp, will run 80 on the highway yet crawls with the best of them. Love the setup and a tricked out 4.3 has plenty of power.

Richard
 
Thanks for the info. They are good motors and cheep to purchase. I am torn between buying and swapping in this or rebuilding my 258. I have built a couple 258 motors before and they are easy but I keep looking at other options.
 
I have an 82 scrambler with a 4.3L vortex out of a 94 S10. It gets 20mpg no matter how I drive it. t5 transmission bolts right up and pushes 33" tires at 65mph at btw 2200 and 2400 rpm. Dana 300 t case and Dana 44 rear, 30 front with 4.56 gears with ARB air lockers all around. In 94 GM was running two different 4.3's. Vast majority were TBI and more rare were MPFI or CPFI(I think?) Mine is the MPFI. The different is in the VIN number. "W" is the TBI and "Z" is the MPFI. For economy and power, I really like mine.
 
Back
Top