• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Wide Track Axles needed...

Engbull

Legacy Registered User
City
Nashville
State
TN
In prior posts I have explained my frame issues (75% perfect, but front right is poorly boxed and the spring hangers and the shackle mounts were modified)...but now I've got an issue with my axles.

This CJ-8 sat for 10 years and apparently it had some water in the axles. When pulling the covers to simply clean and service and to count teeth for proper speedo gear I found a rusty mess.

Does anyone have a pair of wide track axles in good shape, or better yet a good rolling chasis?

I want to get this project going, please help!

Thank you
 
I have a pair of WT's out of an '84, complete hub to hub, with tie rods. Stock, never cracked.

Bit of a drive for you, but if you're interested drop me a PM.

Paul
 
I'm picking up a stock, running '83 CJ-7 Renegade (258/T-5/D300 combo) this Friday. I'm guessing it has 3.31 gearing, or possibly lower (higher numerically), as it has a hitch, and may have a towing package. I'll be parting out the vehicle. Again, it's a ways away from you, but I'd sell the axles or rolling chassis inexpensively.

Craig
 
I am hoping I can find something closer to Tennessee...if I can't I will be in contact...thanks for the replys!
 
I have a rear but am no closer, just warmer. You might talk to JC or Mopedal for cast offs, they're closer
 
I don't know if I'm close enough or not,but I have a set of widetracks.I'm in Richmond,VA
 
Last edited:
Back
Top