• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Restoration Shop Recommendation

Dunned1

Basic User
City
Vernon
State
NJ
I'm the proud new owner of an 85 Scrambler. Incredibly, it only has 6500 original miles on a straight six, three speed automatic, very little rust and everything works on it.

This is my very first Jeep and blessed to have found this gem. My dream is restore it to showroom condition. I'm looking for a restoration shop that does quality work.

I've done a number of searches online, found a couple, but hoping to get the straight scoop here.

Any recommendations?
 
Do you have pictures of the Jeep now? Seeing it's condition might help people steer you towards a particular shop based on work you need done.
 
Thanks for the feedback. I'm having a hard time figuring out how to post pictures here, so if anyone can enlighten me, I do have a handful of pics I could post.

Since I've had it, I've been running it almost every day, back and forth to work. The usual minor leaks and typical rough ride, but had it in the shop for service and running well. Body is surface rust with no rotted floor boards or deeper rot in the usual areas.

My initial thinking is to do a full frame off restoration, keep it as close to original as possible, replace what makes sense, custom paint. I plan to have this as my everyday driver, go to Jeep events, car shows and country rides with my family and dog in the back.
 
What is your projected budget? To pay a shop to do a frame off rebuild is going to cost $$$ plus a few more $$ that you didn't budget for. To do a frame off yourself will still cost $$ but you can farm out body and paint (just take the tub and parts to the body shop) or other parts (engine and tranny to machine shop) without the added cost of having a shop pull it all apart and put it back together for you. Plus you will learn how the Jeep is put together and how to fix it when things break, not to mention the added feeling of accomplishment for doing a lot of the work yourself. A third option is to drive it and fix/upgrade things as money, time and parts failure allow. This is cheaper in intial cost but can get expensive as well in the long run however, you do get to use the Jeep as you work on it. Point of all this is that you need to figure a realistic budget/time frame for the project BEFORE you take it to a shop and drop it off or tear it all apart.
 
Polarfire...appreciate the wisdom and insights very much. I wish I had the time to work on my Scrambler, but just like everyone else, I work a ton of hours and travel a lot. I do drive it back and forth to work, so I am beginning to know every little thing there is to know - good and bad, which has been fun.

I knew when I bought it, I would be sending this to a shop and have budgeted between $15 - $20K with the hope of having it back in time for the Bantam Jeep Festival, in Butler PA, in June.

I plan to keep it in showroom condition and garaged at all times. I know this may be blasphemy, but this Jeep may not see a lot of dirt after the restoration.

Any recommendations of quality shops would be appreciated. I found Collins Brothers in Texas and Toybox Jeeps in Florida as the ones that stick out.

Thanks again.
 
I totally understand the time thing. I thought I would have mine done in 6 months and it is over a year now and I'm not close to putting it back together yet.

I'm glad to see you have a good budget in place and I think it is a realistic one. Collins Bros would work because they have the skills and knowledge to put a Scrambler back together to factory specs since that is what you are going for. They also have a large parts yard to pull from. On the down side, they are rather expensive (may total over $20k for full resto) and they are somewhat far from your location so you would have to figure shipping into the budget.

Toy Box Jeeps does a nice job of building CJ resto-mods but they usually are no where near original when done. Looking at their before and after pics I would say most the Jeeps they build were more original BEFORE they redid them. Still an option but I don't think they match your end goal.

A third option that I would recommend would be Rudy's-CJs (http://rudys-cjs.com/). He is a member here and is located in OH and has extensive CJ knowledge. You might try contacting him and see if he would be able to do what you are wanting.

BTW, pics would still help with getting an idea of your starting point. Good luck!
 
Congrats on your Scrambler and the new wallet consuming addiction you just got yourself into!

Trust me we all how you feel!

Your budget seems very reasonable depending on its overall condition.

We love pics around here and they would help alot in trying to steer you in the right direction for your new project.

For help posting pics use the search option on the forum I think Big Walton has article that can help you faster than me typing. LOL

If your still having trouble posting pics just email them to me and i will post them for you.

PM sent with my contact info.

Later
Sean
 
Last edited:
I'm no big shop by no means, but have done 2 frame off for my self and would do another for someone. Got one of the best Jeep shops right in my town to do things i can not, like rears and trans. Just a thought for you. And i know it would cost a lot less then Collins or Toy box. Got a lot of pics of the two i did. But getting one done by June would be hard. Pm me for my number if you would like to talk.
 
If you are looking to drive it, and CT is not too far, check out SVE Performance in east haven. Jeep only shop. Id have him do everything but paint and prep. One of the few old school cj mechanics I know. Bill is top notch.
 
Congrats,

Last year 85 & automatic is IMO the Holy Grail of Scramblers.

Wow on the low miles?

X-2 on the pics. If paint original .... keep it.

Check out Bobby's Jeep where he brought back an original paint SL.

What most people do is gather hard to find parts then, have restored.

Collins & Toy Box have nothing but aftermarket crap.
 
Welcome to the site! I see you are in Vernon NJ which is very close to me. And if this jeep is the white one that came from middle jersey near the shore then I think I am already familiar with it having checked it out about a year ago.

I can do this type of work and you are welcome to come visit my shop anytime even if to just shoot the breeze. I also have two painters I have worked with for many years now that can paint a CJ properly. Even reduce the clear a bit or use single stage for a more period correct look.

I am currently doing a frame off for a guy on a 1983 CJ-7. Here is the frame ready to go, it only needed a new cross member. My specialty is OEM. Although in his case we are doing a vortec 350 swap.

Regards, Eric
 
Pics of Dunned1s new Scrambler purchase.
untitled2png-1.jpg

untitledpng-1.jpg

untitled3png-1.jpg


Looks to be in pretty darn good shape!
Love the tonneau cover!

You got plenty of options for the restoration my friend.

I will get pics of the last few Jeeps,69 Roadrunner convertible,and a few others emailed to you soon.

Looks like you have quite a few closer than VA though. LOL

Good luck and keep us posted!
 
I'm actually glad that's not the one that was for sale last year in middle jersey. That one had too much rust.

Yours looks much better ! :)
 
What is it with all the almond beige 85's that people apparently just decided not to drive? (looks just like Dad's with 4200 on the odo).

Pretty Jeep!
 
I'm no big shop by no means, but have done 2 frame off for my self and would do another for someone. Got one of the best Jeep shops right in my town to do things i can not, like rears and trans. Just a thought for you. And i know it would cost a lot less then Collins or Toy box. Got a lot of pics of the two i did. But getting one done by June would be hard. Pm me for my number if you would like to talk.

I can vouch for OneTon. His 2 Jeeps turned out very nice and he has helped me tremendously on my restoration, which is my first as well.

For what it's worth it seems like we are in a similar situation, I am in the military and have very little time between work and travel to work on the Jeep. If you would do the work yourself it would probably take about the same amount of time; check out my restoration in the Complete Builds and Restorations and you will see it has taken me almost a year to get it back to where I can start the engine again. 1/27/12 - Present. I have also spent at about 15k after all is said and done on parts/labor for the things I couldn't do myself. The body work was the big thing, mine wasn't too bad but to fix it right it still took $2300 for the blasting/primer and $3400 for the paint/body repairs.

You really have to watch what shops do the work, mine was "restored" before but I have spent thousands fixing their mistakes.

Good luck with the search and if you can, go with someone recommended on here before you take a chance with an unknown.
 
Last edited:
Thanks everyone for the tremendous responses all around, especially CJ ATE for posting the pics. I watched the video but still couldn't figure out posting pics then realized I'm using my iPad and don't have the same icons and buttons to choose from. Maybe some one can educate me posting pics with iPad. I will be taking a lot more detailed pics real soon.

53D...appreciate your service. Army myself - 24 years active and reserve. Retired in 2008.

I plan to PM all of the recommendations for the work that been offered and see where this all goes.

Jersey jeeps...I remember that white jeep in middle Jersey and can tell you for sure it was not that one. I bought this one from the Lincoln Mercury Dealer on route 3 in Clifton. Legend has it, it was originally owned by a guy who had it less than a year and traded it in when his wife got pregnant. The owner of the dealership loved the jeep so much he kept it for himself, put a plow on it and for the next 26 years only took it out for plowing the dealership and kept it garaged the whole time. That is why it only had 6500 original miles when I bought it.

Where I got lucky was when he posted it for sale on AutoTrader, I received the email notification, called him and came down the next day and bought it. I was extremely fortunate to beat everyone else to the punch because several other guys showed up with more cash in hand...true story!

I have so much to learn and truly appreciate all the great advice and insights from all of you. I will keep everyone posted as I make progress. If I ever figure out how to post pics, I will keep them coming as the restoration begins.

Have a great New Year!
 
Back
Top