• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Shock question and opinions

Chad K.

Basic User
City
Tyler
State
TX
O.K. so the previous owner of my '81 put on a 4 inch lift just six months before I purchased it. I plan to swap the lift down to a 2.5 inch lift, over Christmas and I am wondering if I can keep using the shocks I have on now or do I need to swap shocks? If so, what shocks are people running with their 2.5 inch lifts? I don't wheel the Scrambler, it is just for top down family fun and back and forth to work.
 
You will need to swap shocks. If you use the current ones the ride will be pretty stiff and you will possibly bottom out the shocks and bend them. Better to sell them with the lift and get new ones with your new lift.

What brand lift and shocks are currently on it?
 
Interested. If the 4" lift came with a dropped pitman arm, it might have to go back as well right POlarfire?
 
It's a rough country lift, with what look like procomp shocks. I don't think the pitman arm is dropped, however the sway bar extensions are.
 
That's odd. Most 4"lift kits either come with or advise you to purchase a dropped arm. Is yours shaped straight or is it bent in two places to produce the drop? As for the sway bar. That's not a big deal to undo? With the different springs, it will be higher. Just take out the extensions and put originals back in.
 
Up to about 2 1/2 inches lift without drop arm, 4 inches you will need an arm or flipping the links, I have used a drop arm on a 3'' before
 
Don't use a drop pitman anyway, loses too much steering throw, you want to do a tie rod flip, so it's great if it doesn't have a drop pitman.
 
I am wondering if I can keep using the shocks I have on now or do I need to swap shocks?

It really depends on the working range of the shocks. Some manufacturers use the same shock for 2 different lift kits (on a CJ this is more common on the rear shocks than the fronts). Before replacing some fairly new shocks, I'd measure the compressed length of the shocks and compare that to the shock mounts when the suspension is compressed. As long as the shocks don't bottom out, there's really no need to replace.
 
Just went out and looked, to make sure I wasn't losing my mind. The pitman arm is straight and the angle of my linkage is considerable. So when I lower it back down I should be fine?? Right
 
Just went out and looked, to make sure I wasn't losing my mind. The pitman arm is straight and the angle of my linkage is considerable. So when I lower it back down I should be fine?? Right
Yes, you are correct.
 
2-1/2" OME YJ springs.
Bilstein 5100 Series shocks:
BIL-33-185606 Front 14.13"-22.58"
BIL-33-186542 Rear 15.11-24.35
Installed boots down, FWIW.
Look real close at the front wheelwell. Shiny!

20131105_172811_resized-3200.jpg
 
32 fot now . 1 hale l" shackles Ck") 2nd 2 I" body lift, go next time they will be boss

Sent from my SM-N900V
 
Let's try that again. My cell phone doesn't like my handwriting.
32x11.5x15 for now. This is the same set-up as the Charity Scrambler from a few years ago.
But, I have Currie shackles that are +1" giving me +1/2" of lift, and I have a 1" body lift. And, I really got 4" up front and 3" in the rear from just the springs (that's a virgin lift, no sag yet), so I am saying I will be good to go with 33s next time around.

I got the shocks locally from Mr. Beep. He got them through his account with 4WD Hardware.

Aaaack. That picture is with 31s. Picking up the 32s from the tire shop tonight. I'll repost the pic in a day or two. Expecting snow tonight.:eek:
 
Resurrecting an old thread. I have the same set-up and just ordered these shocks:

BIL-33-185606 Front 14.13"-22.58"
BIL-33-186542 Rear 15.11-24.35
 
Back
Top