
That video makes me interested. I did not think about it auto opening like that.
Dain
Installed the HoodLift brand kit from quadratec this summer on my '81. Really great, and it's super super easy to pop off the two actuators in case you ever want to fold the hood all the way back to the windshield to get some more light in. I rarely ever do this beacuse it lifts up quite high, higher then with the stock prop rod. Here's the video that convinced me:
https://www.youtube.com/watch?v=fboy0OwcYDc
If you have a swingout tailgate you could modify this one right?
http://hoodlift.com/wp-content/uploads/HL-93106-YJ-TJ-TailGate-Prop.pdf

Why would anyone have anything but a drop down tailgate?
cb







Here are some pics and a movie. I mentioned to my wife that the camera adds 10 pounds and she replied, "Just 10lbs[/video]
Got mine installed as well, it only took about 30 minutes thanks to the advice from CDVCJ8 advising that there were better instructions on thier website. The paper instructions were absolute crap. I took a video so I could complete with the earlier show but technology seems to have escaped me, the video disappeared. The passenger side prop is on the 2nd hole while the driver's side is on the 3rd hole. Not sure why but at this configuration the hood opens and sits evenly.
Congrats and glad that helped. I don't know if it's the angle of the pic or not, but the drivers side looks like it slipped over a little. One of the docs mentioned that might happen once as the Ubolt stretches. It happened to me so I adjusted and tightened again and it's been good since then.
Does anyone have a product number or such for this hood lift from 4WD or Quadratec? I can't seem to find one for the CJ on either site.
I found this "Rugged Ridge" part but is it the same one? Is the quaility of the Rugged Ridge one any good?
Rugged Ridge 11252.50 Hood Lift Kit 72-06 Jeep CJ & WranglerRugged Ridge 11252.50 Hood Lift Kit 72-06 Jeep CJ & Wrangler
Thanks,
Chip