• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Hood lift recommendations?

That video makes me interested. I did not think about it auto opening like that.


Dain
 
They sell the gas shock things for the tailgates of full size trucks for about $25. Almost picked one up for my dad's truck at Christmas. Don't think they make one though for the Scrambler so this might have to do the trick!


Dain
 
Installed the HoodLift brand kit from quadratec this summer on my '81. Really great, and it's super super easy to pop off the two actuators in case you ever want to fold the hood all the way back to the windshield to get some more light in. I rarely ever do this beacuse it lifts up quite high, higher then with the stock prop rod. Here's the video that convinced me:

https://www.youtube.com/watch?v=fboy0OwcYDc

I ordered one yesterday and hope to have it installed this weekend... a little extra shipping but I am only in town for two days. I will let you know how it goes!
 
Why would anyone have anything but a drop down tailgate? ;)

cb

peneteqe-1.jpg



 
Thanks everyone for the great advice. That's why I love this site :thumbsup:

I went with the Quadratec one as well. It's a Warrior product now, as HoodLift was acquired by them.

The instructions that came with it are all over the map. If you go to the Warrior website they have simplified instructions. For example, they differ greatly on how to deal with the existing prop rod.

I'm very happy with it. I had just two issues. Prop rod screws had to be drilled out and I had some access problems with the Ubolt. The Navajo dual booster on the driver side and the negative terminal of the battery on the passenger made it a little awkward. I guess I could move them forward a little, but it seems like it won't be too big a problem. That would also give me a little move lifting power. I'll play with that over time.

It's currently at the Car Show position as it's in the first hole and provides good access to the engine compartment. I have to grab the hood from the side though as it's so far back.

Here are some pics and a movie. I mentioned to my wife that the camera adds 10 pounds and she replied, "Just 10??". Ouch...

photo 4 (1).JPGphoto 2 (1).JPGphoto 3 (1).JPGphoto 1 (1).JPG

[video=youtube_share;tEAvz8Ztsks]http://youtu.be/tEAvz8Ztsks[/video]
 
After that movie, I gotta have one. Outstanding on-camera presence!

You make it look so easy, I think my 2 year old could handle that!
 
Got mine installed as well, it only took about 30 minutes thanks to the advice from CDVCJ8 advising that there were better instructions on thier website. The paper instructions were absolute crap. I took a video so I could complete with the earlier show but technology seems to have escaped me, the video disappeared. The passenger side prop is on the 2nd hole while the driver's side is on the 3rd hole. Not sure why but at this configuration the hood opens and sits evenly.

All in all, a very easy install and highly recommended.





 
Got mine installed as well, it only took about 30 minutes thanks to the advice from CDVCJ8 advising that there were better instructions on thier website. The paper instructions were absolute crap. I took a video so I could complete with the earlier show but technology seems to have escaped me, the video disappeared. The passenger side prop is on the 2nd hole while the driver's side is on the 3rd hole. Not sure why but at this configuration the hood opens and sits evenly.

Congrats and glad that helped. I don't know if it's the angle of the pic or not, but the drivers side looks like it slipped over a little. One of the docs mentioned that might happen once as the Ubolt stretches. It happened to me so I adjusted and tightened again and it's been good since then.
 
Does anyone have a product number or such for this hood lift from 4WD or Quadratec? I can't seem to find one for the CJ on either site.

I found this "Rugged Ridge" part but is it the same one? Is the quaility of the Rugged Ridge one any good?

Rugged Ridge 11252.50 Hood Lift Kit 72-06 Jeep CJ & WranglerRugged Ridge 11252.50 Hood Lift Kit 72-06 Jeep CJ & Wrangler

Thanks,
Chip
 
Last edited:
Does anyone have a product number or such for this hood lift from 4WD or Quadratec? I can't seem to find one for the CJ on either site.

I found this "Rugged Ridge" part but is it the same one? Is the quaility of the Rugged Ridge one any good?

Rugged Ridge 11252.50 Hood Lift Kit 72-06 Jeep CJ & WranglerRugged Ridge 11252.50 Hood Lift Kit 72-06 Jeep CJ & Wrangler

Thanks,
Chip

Here's the part number shown on my 4WD.com order.

Part # HLI99834

Jeff
 
Thanks all!
Seems 4WD doesn't have it anymore. May have to get it from Q!



 
Back
Top