• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Carb Options

Deacon61

Basic User
City
Boca Raton
State
FL
My carb is running really rough and it looks like I will be replacing it. Previous owner put something on that probably does not belong (will get pics for you guys soon so you can help me ID it). Does anyone have any recommendations for the most efficient replacement option? I have the 258, don't plan on doing much other than weekend driving with the scrambler. Holley 2 barrel or weber upgrade? I'd love go hear the experts thoughts on this. Looking to spend as little time and money as possible (aren't we all? Hahaha). Thanks.
 
I've done the MC2100 with a little luck but LOTS of tweaking and chasing vacuum leaks. Still ran rich and couldn't get the power valve/jets just right. Tried to solve that with a Weber 32/36 clone...it ran okay but very unimpressive power and responsiveness and never could get it tuned just right. The bit the bullet and bought a GENUINE Weber 38 (made is Spain - stamped Weber - the red stickered ones are clones)....tuned it in 5 minutes with it in my hand, bolted it on and it ran like a dream. Powerful, responsive and just plain fun. That was my best lesson in do it once, do it right...and I'd do it again. It was worth the initial outlaw of $ to me to not spend al my time messing with a carb. Just my 2 cents. Cheers, Dylan


BTW - there's a great write up on this over at Jeepforum. PM me and I'll send you the link if you're interested.


 
If your planning on keeping the jeep for a while look into fuel injection

X2 on the fuel injection.

If you dont want to go with fi, mc 2100 or 2150 worked well for me. I've still got it and the adapyer plate if you are i terested.
 
My Howell kit ran about $1000, I believe the MOPAR kits are roughly twice that amount, my kit runs just fine, very pleased.
 
I did the junkyard deal from a 4.0 motor. There are still plenty out there to be re-claimed. Total cost was about $1000. Once you go fuel injected, you'll never go carb again.
 
I'm in agreement with the fuel injection if you are planning on keeping it.:wave:
 
Any suggestions on the fuel injection? Is there a kit that one of the major companies sells? Thanks! I may be leaning towards that...
 
Any suggestions on the fuel injection? Is there a kit that one of the major companies sells? Thanks! I may be leaning towards that...

Howell and MOPAR are the 2 most popular brands. MOPAR is probably more complicated because it's mulit point fuel injection and Howell is a throttle body injection. However, if you do the junkyard thing, you also end up with the improved head. That's worth a 20 - 40 more horsepower (so they say). Don't let anyone fool you; it's a lot of trouble. But VERY satisfying when you crank it up and it purrs like a kitten. If you are somewhat of a mechanic, DIY kinda guy, you can save some money and maybe end up with a better product.

However, it sure would have been nice to have some factory technical support (or even just a rotten set of instructions) when I did mine. I aged a few years on that upgrade.
 
So I found a local 2BB

ImageUploadedByTapatalk1396271185.144464.jpg

carter carb off a YJ that has suposedly been cleaned etc. Can I use this in the 8?
 
Worth a try. It may work out for you, at least until an injection system lands under the Christmas tree. :wave:
 
That's what I am hoping for! Long term I think injection may be what I do, but for now, I need a carb that works.
 
Good luck with the Carter BBD from a YJ-- Chrysler should have recalled the truck over that piece of junk, jeep owners the world over hate that carb. I vote MC2100 (no experience with Webber)

4.0L head and Mopar FI is grand, you will not recognize your motor, to get you started,
https://austin.craigslist.org/pts/4382630634.html

YJ8
 
Good to know. I have no experience with the OEM carbs. I will take some pics of what's on there now and see if you guys can ID it. Thanks for everyone's help!
 
I have the Weber 32/36 on my 84 and a Weber 38 on my 82. Both run fantastic. Super simple under the hood which is what I like.
 
Mine is getting the Mopar fuel injection this week. Probably sell my Weber 32/36 next week. How about $100 plus shipping?
 
Mine is getting the Mopar fuel injection this week. Probably sell my Weber 32/36 next week. How about $100 plus shipping?
Scramfan01 Are you coming to the IOK Spring Swap Meet next weekend? :wave:
 
Directions at: Gravelrama.com

Next Friday, Saturday and Sunday. Friday is $15 which gives you a three day pass which includes camping,vendor space and parking. Saturday and Sunday is $5.00 a day. Which still includes all the amenities as a three day pass. You can't get in the grounds till Friday! :wave:



Largest "Jeep swap meet" Ive been to. Usually several board members there to help me find all the Scrambler goodies.
 
Back
Top