Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Here's what was in the 96 ford f350's cab corners. It held the water between the foam and the metal corners. You could squeeze the water out of the foam.
If you can disconnect the rubber fuel line at the steal line (by the tank) hook a 3ft fuel line into a fuel can of fuel. Line good pump will have fuel.
The message you have entered is too short. Please lengthen your message to at least 3 characters. Is the message I get on the old site (tried to make a new tread in introductions on the old site). I first tried on the new site and it works. When they switch from the old site to the new site I...
If it's not a kinked hose and you blew air through the hose (if blocked the air should have backed up where you put the air to) check to make sure the fuel line isn't broke or rotted. The pump would pull the air through the break and wouldn't have the suction to pull the fuel from the tank. I...
I get a error message something like not enough characters. Tried to contact a mod and haven't been able to. Some of the member on this forum are also on that forum. This is the forum, believe it's the same. http://www.jeep-cj.com/forums/ Belizeit is one of them. Maybe he can pass it on...
Holley wants the fuel pump around the bottom of the fuel tank and as close to the tank as possible (preferably not on the frame rail in front of the tire). Electric fuel pumps are not good at sucking the fuel, but are used to pump the fuel from the pump forward. By having the pump on top of...
I may be wrong but they made the focal point where the pipe meets the axle tube. That's where the pressure would be instead of at the diff. Don't know how much stronger the axle tube is there. Wouldn't it be stronger spreading the force along the majority of the axle tube. Then having a...
Would keep them in place, wouldn't really keep the caps from spinning in the yoke. Only thing that should spin or move is the bearings. I would think most bearings would freeze up before the cap rusted to the yoke.
I've seen pics of cj's that had pipe bent and mounted to the frame (similar to roll/step bars trucks have it get into their trucks). Rear end can slide on the rocks without touching the body.
Do it with everything (even using a box to push spark plugs through and mark position). Rates right with taking pics on the phone. Can blow the pic up to see everything. Both a big help for us who don't do this often.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.