Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Your more than welcome to bring the lines by and we can flair them at the house if you need. Didn’t even notice you were that close or would have suggested that earlier. However I do not think you will be disappointed with your purchase that tool has been one of the best I have purchased for sure.
About 80% buttoned up on the inside today. Console in, dash installed and lots of wiring cleaned up. Only had to take the dash off one more time than I wanted as I wired the check engine light the wrong way and it wasn't working. Works now but wont go out so there is that. But all the gauges...
If you mean the small tires I am using to get it in the garage they are even small in the stock world. I got them from a used tire shop and are the lowest profile tires they has that fit on a16 in rim. Overall height of the small ones is 22in if I remember correctly. They are tiny for sure.
Finished mounting the new tires on my H1 rims today and of course had to put them on to see how they looked and be sure that everything fit as it should. Rear wheel well will need to be cut just not sure how much just yet. Things are getting too heavy to flex with the tools i have in the garage...
I'm pretty bad at figuring out the "packages" but from welding the two tubs that I have fixed back together she looks very doable. Congratulations looking forward to seeing this one progress.
I did order beads to try. I am honestly not sure how often this one will be on the road it is pushing many of the height limits here in VA. And by pushing I mean well past. Will see how the beads do.
Also had some time to work on getting the dash and console ready to get installed. Going to wire a few more things before I put it in the jeep its much nicer to be able to walk all the way around it rather than standing on my head trying to finish up stuff I can do now.
I have a set of re-centered H1 rims that I am planning on using for this rig that had military tires on them so in order to mount the new tires I picked up I needed to pull them apart and get the inner ring out. Turns out that is pretty demanding a task.
Used a spray bottle with soapy water...
No not a chance of it fitting with the big tires. I’ll have to swap the rollers on to get it in the garage.
I have a full hard top and hard doors for winter storage once something else finds its way into the project area of the garage.
Still working on the wife for a bigger garage as I have...
1. I would take the advice form the folks above they have the experience to back up those answers up for sure.
2. Lots of options for harness I believe a few folks on here have worked their own. Which gives you the options to route things where you want them rather than someone else's ideas. I...
Well yes. I’ll be the first to admit I should have done many things in different orders it just kind of all happened the way it did. I have learned a great deal about what needs to happen when and could have been done long ago if I hadn’t had to back track a few times.
This was the original...
Spent the day running around central Virginia picking up parts. Console and dash fro JeeperDDs place. Then a set of rollers fro another friend down that way and finally over and picked up a set of 42s that will fit my H1 rims. Now time to see if I figured everything right. Hope they fit.
Now that the engine runs and I have been running it from time to time i have started to find all the leaks. Had a coolant leak that I was guessing was a water pump gasket. So off came the water pump and sure enough pretty obvious leak. First water pump removal on an LS for me and it was...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.