Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
If I were going to shorten it, I'd trim down the female side of the adjustment rod and, if necessary, the threaded end of the adjustment bolt (areas shown in red). This way the contact points remain "as manufactured".
Black: Adjustment Bolt
Grey: Lock Nut
Blue: Female Side of Adjustment Rod
Not first hand experience....
But for <1/16", I'd probably go with option D.
If I were to try to shorten it, I'd probably grind down what ever is keeping it from getting shorter... internal threads, external threads, or both of adjustment mechanism..
Found this:
https://www.quadratec.com/sites/default/files/installation_instructions/153342.pdf
It says: "Torque the bolt-in center brace bolt/nut to 55 Lb. Ft. torque. Tighten the greaseable shackle bolts to 30 Lb. Ft. torque."
I have SBC 350 connected to an NV4500 with the AA bellhousing. Yes, there is a return spring connected.
I fabricated a super simple mounting plate for the slave cylinder that gave me a straight line push to the clutch lever and also gave me a nice mounting point for the return spring
Maybe this will help -It seems to show the front bow you look to be missing....
https://www.cj-8.com/threads/kayline-soft-top-installation-instructions.48449/post-396527
EDIT: I just realized it's for the half top.... but I'm wondering if the bow may be the same?
IIRC correctly (it's been a while since I had a mechanical pump)- you could remove the pump (keeping the tank side fuel line connected) and hand-actuate the lever to see if the pump works.... you should be able to get fuel out the the pump outlet (carb side).
For the slave cylinder:
> Advance Adapters Jeep Slave Cylinder Kit (PN 716331)
I think I bought the kit from AA because it had the wedge I needed for my Chevy conversion lever.
On the CJ-7 (T-18/Dana20), I just used the slave from the same year/model as the master.
I was able to use the stock...
I did that on my CJ-7 and now, on my CJ-8.
For the Master Cylinder I used:
Duralast PN 11958
Application: 1983 Jeep CJ-7, 2.5L, 2 BL
I can get you the Slave and hose info, along with some measurements, later.
I found stainless steel replacement hardware for the heater box. So, I just thought I post these up in case anybody else is interested.
Screws for attaching the heater box metal back plate to the plastic box and for attaching the fresh air box to the front of the heater box:
McMaster-Carr...
In the description/information for this video - there a link to a PDF with full size templates for all of the heater box seals.
They have been working beautifully for me.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.