Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Looks great! I ended up buying a similar setup. Two of my ome springs had "+" signs and two had "-" signs. There were no instructions, so guessing it means high or low check load or maybe left and right?
Thanks for all the help. Still a little confusion on my part. Seems like most of the yj conversion kits come with parts to convert the front. Do yj springs fit on the rear with stock Cj hangers and spring plates?
Sent from my iPad
Thanks for all the input! It seems like the YJ conversion is the way to go. Should improve ride and flex off road... I just need to save up a few more bucks. Here are the details on the bds kit.
Looking at getting the BDS 2.5" lift kit for the CJ. BDS recommends upgrading to the YJ spring conversion kit for improved ride (wider springs and less friction). Anyone have any experience with this? Is it worth the extra $400 or should I just stick with the CJ kit. Thanks!
31's for now but potential for 33's in the future... Not sure but might need a little body lift on top of the 2.5" lift for 33's if you plan to go off road...
I don't have it yet, but planning to also get the BDS 2.5" lift in the next couple months. I am planning to upgrade to the Fox shocks. I will keep you posted with my progress...
Thanks all for the help. Turns out I have a 6 cylinder model. I did a little more research myself. According to the Service Manual, it looks like the 6 and 8 cylinder tachs have a black ground wire, orange illumination wire, and 2 red signal wires (one with a white stripe). The four cylinder...
I have a '82 CJ8 with the 4 cylinder 2.5L Iron Duke. It did not come with the factory tachometer, but I have one from a donor dash. I am guessing the tachometer is from the 258 or 304. Is there a way to make this tachometer work correctly with the iron duke? Also, would the wiring harness...
Have you tried removing the front track bar? This could be increasing your lateral stiffness and reducing your understeer. Removing it should increase your compliance and slow down your steering.
When I purchased my CJ8, both rear tail light panels were dented in. It looks like someone jackknifed a trailer on both sides. Anyway, I am trying to decide if I should have the panels bumped out, or just replace the sheet metal. I was not able to find direct replacements for a CJ8. But...
What wheel offset/backspacing are you running? This can dramatically change the steering response if you have changed it much from stock. I drove a CJ8 with 33" tires and new steering gear a few weeks ago. It looked like the wheels had much less backspacing than stock. The on center steering...
Hey, I am looking to put some slightly larger tires on my CJ8. I want to keep it close to stock with little modification, so leaning towards the 31x10.5R15 size. If you are running this size tires, please post pictures. I am interested to see how it looks. Also would be curious to know what...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.