Rmhavema (I'd love to know what that means), the main things you'll need to put the wider YJ springs on the front of your CJ, are wider shackle hangers, wider shackles, and wider spring plates.
I bought new front spring hangers from Rocky-Road, because I like how sturdy they are, and I bought a MORE YJ shackle kit. As JerseyJeeps mentioned though, plenty of people have adapted rear CJ hangers and shackles to work on the front.
If you want to try adapting rear CJ hangers and shackles, I have the set that came off the rear of my Scrambler, that I'll give you.
For the spring plates, I ordered an OMIX-ADA YJ right-front plate for the front right (yes, it has the correct u-bolt spacing), and a CJ right rear plate for the front left. You could source these from a wrecking yard as well. My shock mounts are welded to the axle tube (as yours probably are), so there's no need to weld extra studs to to the spring plates. Heck, I think I even have a right rear CJ spring plate I can send you, so you'd only have to buy a right front YJ plate!
Using this method, you'll have about $30 tied up in conversion parts, rather than $400... but as Spieg mentioned, you'll still need to buy u-bolts, etc...
Have fun!
