• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. C

    Charcoal Canister

    new purge valve If your actual can isn't split, you can just put a new purge valve in-line. They are about $6.
  2. C

    Jeep CK-8 Build

    I am looking forward to seeing how that goes. I think it will fit too based on measuring. Was planning to try in a 7 I am finishing for my wife.
  3. C

    IAFFCJ 81 Scrambler

    83-84 decals They are 83-84 decals. Got mine from Phoenix Graphics.
  4. C

    Florida '84 Scrambler

    FLC is right on the counterweight count and bolt sizes. The 83 should also have an aluminum intake whereas the 80 may not, unless it was swapped on by a PO or an original California build. In addition, the 83 head will have smaller valve guide bosses in the ports and "flow better" than the...
  5. C

    Baffling question

    I did something similar to Randyzz but on the stock 20 gal tank. This is same type sending unit he used. https://www.cj-8.com/forum/showthread.php?47245-How-I-internalized-my-fuel-related-issues&highlight=
  6. C

    MC 2100 -slowly working on install- questions.

    Josh - You would only need to nutter bypass if your Jeep had the computer controlled carb and ignition. If it did not or if it is removed already by a previous owner, there is nothing to bypass. The two "upgrades" to stock that are talked about in this thread have 2 different purposes. "Team...
  7. C

    MC 2100 -slowly working on install- questions.

    Ignition systems can be super complicated in terminology. I'll take what FLC started a step further. For clarity, the stock Jeep ignition system is the Duraspark II that Ford used from 60s to early 80s. The module on the driver fender (same as HEI module like FLC said) turns spark on/off and...
  8. C

    Fuel And Temp Gauge (Opening up a Can of Worms)

    Those threads Mr. Strenk has put up on other sites are really good. Here is a second one that has a bit more measuring and testing detail: http://civilianjeep.info/Strenk/Gauge%20web%20page/basic_troubleshooting_for_cj_gau.htm Those readings suggest you have a bad CVR. Those fail for lots of...
  9. C

    Fuel And Temp Gauge (Opening up a Can of Worms)

    I couldn't find a set of the Mopar gauges when I needed them. Good find, lots of good things said about them. If you want to check your stock gauges, they can tell you about how/why they failed. May help with what to check in circuit. If the CVR Spankers is referring to in fuel gauge is bad...
  10. C

    How deep is a factory 20 gal tank?

    tank topography Speig - Ill see if I can find my drawing with exact measurements. But these may help too. This picture shows the layout lines of the transitions on the bottom of the tank as I projected and drew them on the top of the tank for measuring purposes. The long vertical line (as...
  11. C

    Welding HDPE fuel tank

    I did some welding on mine. I used an HDPE rod I bought at Mcmaster for filler. For prep, I dropped the tank and drained it. Put some rinsed gravel and Simple Green in it for a slosh (until soap came through the crack) and rinse. Then let it sit with all hoses off, valves out and sender...
  12. C

    Bed holes

    It should have 3, and they are the rear seat/seat belt attachment points
  13. C

    Seat Re-upholstery

    I got samples from a place called "seats shop" on amazon. They do leather covers in Laredo style that are $299 a set. They also do other custom stlyles and the samples looked good.
  14. C

    Store bought complete exhaust system

    mhinchcliffe - sent you a PM. I have a stock set up for you.
  15. C

    Jeep CK-8 Build

    I have a set of the Corbeau Moabs. Looks like a same general frame size/shape as GTS, with adjustable headrest. My focus point would be the recline mechanism which appears exactly the same. Recline system would be my only suggestion for thought. I have not had any problem with mine (6' tall...
  16. C

    GM LS in tank pump / sender assembly tower in CJ 20 gallon tank - Writeup?

    I'm not sure this is a how to either, but you asked.... https://www.cj-8.com/forum/showthread.php?47245-How-I-internalized-my-fuel-related-issues
  17. C

    pulling steering wheel

    I won? Well, I got it off. What worked: Penetrating oil. Put the second wheel puller on, again, the one where you already turned the press bolt so hard you rounded the hex corners off the drive end. Spray the joint with penetrating oil some more. Put the 14inch pipe wrench on the press bolt...
  18. C

    pulling steering wheel

    What other creative methods have you guys used to remove steering wheel? I have tried: - standard puller (broke the puller body at edge of center press bolt) - second standard puller, Matco brand (broke 2 pull bolts in 2 tries) - third try with Matco puller - drilled and tapped 2 more holes in...
  19. C

    Extra orange wire w/ connector

    I meant to add, it could be the 4wd indicator light wire as well. That would be orange and have a round female connector on end (as opposed to spade type). It would go to EZ location on diagram FLC posted.
  20. C

    Extra orange wire w/ connector

    It could also be the under-hood light connector, that is orange under hood and has single female connector on it. It goes to DY location on the bulkhead connector picture FLC posted.
Back
Top