Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
I can't tell if these are two overlapping beam pattern, or switchable from one to the other (fog / driving), anyone know?
https://www.amazon.com/HELLA-Optilux-H71010321-Halogen-Driving/dp/B0002MA3OO
Good to hear...
I had one seize up on my going 65mph and it scared the shit out of me. Could've caused a dangerous wreck. However, it was new to me at the time, and it's likely a slow leak caused it to be low on lube, which as you point out will lead to failure. Good to keep an eye on that!
Hey Good News! I found the solution... When I looked closely at the new hinges, they have brass liners pressed into the stainless. They are hard to see at first, because they are painted over. But I pressed them out with the tool that comes with the Nylon liners. Then the liners go in...
Saw this today.... This would be THE WORST.
Got me thinking, what security systems measures do people take?
- Is putting a "club" on the steering wheel the best security measure?
- If not, what else do people use? - Is a car alarm worthwhile...
The bushings:
https://www.summitracing.com/parts/rto-rt25008?seid=srese1&gclid=CjwKCAiA1uKMBhAGEiwAxzvX91uqESgjqEVEETcs9f9SuYQ4WDwNsrepicaHoO6Pltk1DRCUL6Go1BoCSg0QAvD_BwE
The hinges...
So I got these nylon hinge liners/busnings, and they don't fit. The hole in the lower door hinge is too small. They tell me it must be aftermarket(?), that their liners fit oem CJ, which means the hole needs to be 7/16".
It seems all the aftermarket ones are too small. Anyone have experience...
The trans mount holes look correct. However, where the x-member mounts to the frame could be adjusted.. There are slots there but someone seems to have re-drilled some holes...!
Yes, I'm concerned about 4:1 D300 limitation. With the stock D300 (2.6:1) I like being able to shift up to go faster when the trail is easier, rather than having to stop every time to shift in and out of 4lo/4hi. Anyone run have the 4:1 D300 that could chime in on this?
Otherwise I might go...
Here are the pics of the engine mount (passenger side) that is tweaked. I don't think it's tweaked enough to be the wrong bolt holes. I had the frame check when I started the build, and it was not perfect, but was straightened. My hunch is that the bracket that extends from the frame to the...
I discovered the source of the squeaking, it wasn't the engine mounts.
By the way, the bolts from exhaust manifold outlet into exhaust pipe were "snug" but on the verge of being loose. I cranked them very tight. Then I began to wonder if that was the right thing to do. Anyone know if there's...
Mine goes to the REAR engine mount bolt on the drivers side, but to the FRONT engine mount bolt on the passenger side. I'm not sure if this is correct thought. I looks like if it went to BOTH rear bolts it might hit the oil pan(?) Anyone know?
I had my frame checked before building the Jeep. The said it was straight. However, for one of my motor mounts the rubber block is tweaked badly out of shape in order for it to fit. it seems the misalignment is like the engine it too far forward or backward, however, the other mount is ok. Could...
I think an AX15 with a 4:1 Tcase might be the way to go!? That get's me a dependable, strong, light and easy-shifting box combined with the super low gearing I would get with a granny-gear truck box.. Sound right!?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.