• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Door hinges - oem vs aftermarket quality issue - GOT ANY?

MomoJeep

Basic User
City
Seattle
State
WA
So I got these nylon hinge liners/busnings, and they don't fit. The hole in the lower door hinge is too small. They tell me it must be aftermarket(?), that their liners fit oem CJ, which means the hole needs to be 7/16".

It seems all the aftermarket ones are too small. Anyone have experience with this?

Anyone got OEM style that have/had some kind of liner/bushing in them?
 
Every set of factory CJ hinges I have ever owned were too small for those inserts.
 
Interesting - I just noticed that these Kentrol SS hinges have a Metal liner pressed into them. Maybe I can knock it out, and replace with the Delrin.
 
I would contact RT Offroad directly and see if they can help you figure out the problem. Maybe they would actually make a set that does fit CJs.
Here’s another opportunity for some high- end aftermarket parts. Think along the lines of the Crabtree shackle kits. Milled from a solid billet with bushings. Probably cost $500 for a full set but it would be worth it…
 
Here’s another opportunity for some high- end aftermarket parts. Think along the lines of the Crabtree shackle kits. Milled from a solid billet with bushings. Probably cost $500 for a full set but it would be worth it…
I think you ought to contact Jim @ crabtree 573-565-0004. He is a Jeep guy and maybe interested in making something. I have him looking into something for me.
 
The CJ's don't have the plastic sleeve bushings. TJ's do, maybe YJ's?

I tried to drill out a lower hinge on my red Scrambler to install a sleeve, but I destroyed it in the process.

Post 1663 is where it starts:

 
Last edited:
Here’s another opportunity for some high- end aftermarket parts. Think along the lines of the Crabtree shackle kits. Milled from a solid billet with bushings. Probably cost $500 for a full set but it would be worth it…
Exactly. Do it right the first time.
 
Hey Good News! I found the solution... When I looked closely at the new hinges, they have brass liners pressed into the stainless. They are hard to see at first, because they are painted over. But I pressed them out with the tool that comes with the Nylon liners. Then the liners go in!

Although brass is better than steel-on-steel, I opted to put in the nylon because they also have a "flange" on top that cushions between the door-portion of the hinge and the body-portion.
 
Back
Top