• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. bigwalton

    bigwalton's Postal Stroker

    That would be the fallback I guess :shrug:
  2. bigwalton

    Genright fuel tank access door (CJ/YJ unit)

    Installed by drilling out and countersinking the four side holes for stainless screws/lockwashers. I don’t like the idea of rivets and I didn’t want any more holes than needed. The frame isn’t going anywhere and doesn’t see any load that the rivets would help with IMO. I grabbed some peel...
  3. bigwalton

    bigwalton's Postal Stroker

    New plan: get tank in, skip finishing the wiring, make a “break in board” (literal piece of OSB) that will have the Terminator X, relays, fuel pump power, etc needed to fire it up, install the ignition/engine harness wiring, attach radiator with prop rods, run fuel lines temporarily. Ignition...
  4. bigwalton

    bigwalton's Postal Stroker

    My wife has taken to asking “so what are you going to get done on the Postal today” in the morning and “what did you get done on the Postal today” in the evening and she’s coming out to sit with me and help as needed. I think she’s tired of hearing me complain that I wasn’t getting anything...
  5. bigwalton

    bigwalton's Postal Stroker

    I saw that when I got the pump and fuel line setup. The total “splurge” Holley laser level sender was $130 (which I got based on reviews I saw specifically with speedhut gauges and a hope for longevity without moving parts), and I couldn’t take the price for that as a simple can with charcoal...
  6. bigwalton

    bigwalton's Postal Stroker

    If anyone has a good vent solution for the tank to fight fumes without getting into running lines all the way to the engine bay, I’m all ears. Everything I see is as much or more than the freaking Holley level sender!
  7. bigwalton

    bigwalton's Postal Stroker

    Lots of hole drilling and things are ready to mount. Had to drill/tap for the Holley lidar level sender (non-contact) since I didn’t have a generic SAE level sender hole. Worked out nice that it could go in the block off plate and save more shavings going in the tank. Spent as long vacuuming...
  8. bigwalton

    Glove box door slider hinge mod for cage clearance

    For Mater, I made one up out of plywood and some metal unistrut type stuff because the stock paper box was in tatters.
  9. bigwalton

    Glove box door slider hinge mod for cage clearance

    Added a warning, just in case… these are from a right-hand drive Postal. Reverse the pics for normal Jeeps.
  10. bigwalton

    Glove box door slider hinge mod for cage clearance

    Found the thread I was thinking of but the pics don’t work now. Simple enough and has the step by step. https://www.cj-8.com/threads/postal-full-cage-with-a-couple-twists.23012/page-2#post-166469
  11. bigwalton

    bigwalton's Postal Stroker

    Yes it is.
  12. bigwalton

    Glove box door slider hinge mod for cage clearance

    The angle and camera lens make it look like the door might clear the a pillar. I assure you, it does not. ;) In the partially open pic you can see how off-center the door is after sliding right.
  13. bigwalton

    Glove box door slider hinge mod for cage clearance

    IMPORTANT NOTE!!! Pics are from A RIGHT-HAND DRIVE postal Scrambler! Reverse them for a normal Jeep, don’t do exactly what I did. This came up on my stroker thread and want to share it here. When I did my cage, the a-pillar on my passenger side blocked the glove box door. I modified the...
  14. bigwalton

    bigwalton's Postal Stroker

    I found it somewhere. Not my idea. Note that I ground down the threads on the “slider” portion. Works perfectly and haven’t touched it since I did it years ago. In other news… got the hatch frame mounted. Drilled out and countersunk the four bolt holes on the short sides for stainless...
Back
Top