Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
I must be getting old.
I have no idea why anyone would, or could have the time to do such a thing.
Thanks for the heads up though, if i see someone put a duck on mine at least i'll know to back off and not use some choice words.
Agree with Dave - here's mine - TF999 Auto, note the third connector on the left.
I really need to get a new solenoid, also and to hijack the thread a bit - does anyone have a good source for the female connectors for these. The usual stuff you find is cheap and nasty.
Extending the wheel-wells would not be difficult - essentially that's what i had to do to repair mine, (the outboard edges are going to be rusty) just flat sheet bent round a wood former. You would end up narrowing the bed - but that's straight cuts and folds. Hey if i can do it then any one...
On a more serious note I'm guessing your frame is probably in reasonable shape, may need the mounts fixed up and some work at the back. So that's not a costly job. You can get most parts for the tub - not sure what the cost is compared to Aqualu - but at least you would keep it RHD. Getting the...
I was going to say that maybe the seal got damaged on the rear clutch during rebuild- but if it had the issue before your friend rebuilt it that would be unlikely.
I assume you have seen Aglever's thread https://www.cj-8.com/threads/torqueflite-999-rebuild.52594/
Did the overrunning clutch get...
Thinking you should be able to check the pump by the line pressure without taking it out. Suggest you get a copy of the workshop manual section 2C or a transmission book. Check out https://oljeep.com/edge_small.html - Guessing it's the rear clutch from the guide - but it could be as simple as...
Pretty sure most of these will just be 0.25" (maybe 5/16") Hot Roll steel plate with a 3/8 UNC threaded hole. Paint them before spot welding the cage, and you should be OK. Classic don't usually apply any coating.
You will need to fabricate a joint plate - i don't see it in the parts manual - mine has a bead along the joint - but i don't think that's a must. There are 10-24 screws each side there should be rivnuts in the screen and top
They must have used a custom bearing, it should be possible to machine a bushing, just have to design it to hold the bearing in position on the forward face
I recall using 2 pieces 3/8 allthread and straps up to a point on the gearbox housing - just jack it off with nuts.
Are you going to add a vent to the rear of the gearbox and block the vent in the top of the steel pump? (Hole to the right of the one you have circled at the top).
Google tf999...
Yep - This is what we see, looks like the log stopped before you went anywhere.
The config file and datalog should look something like this
Preferably without the dropped out AFR trace though :unsure:
Anyone have an intuitive guide to understanding a sniper kit?
The Holley Sniper...
Not seeing a strap clamp on the rear hanger or is it welded? - does the exhaust feel loose at the back?
You may be able to pull the exhaust in at the back and away from the wheel ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.