• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. Kim Dawson

    What's on your Work Bench?

    Made up a couple of center console pads for the OEM consoles today. One Garnet and one Honey (spice if you have a YJ). Same leather on them as I use on steering wheels. I have a skiving machine that I use to thin down the leather that I use on the welt to make it tiny like on the original pads...
  2. Kim Dawson

    304 & 999 Scrambler Build

    Got the windshield assembly ready to install when someone is here to help with it. I has a Wrangler glass with rubber installed. CJ rubber and glass has leaking problems sometimes but the YJ setup has no chance of leaking . . . and it looks cleaner because the rubber isn't so big and doesn't...
  3. Kim Dawson

    Heater Box Repair

    There are probably many ways to fix it. You could do it without the pop rivets. Or use countersunk rivets. Or grind down the heads of the pop rivets after the epoxy is dry and put filler over them. Or use screws to hold the metal in place until the epoxy dries, remove the screws and fill in...
  4. Kim Dawson

    Heater Box Repair

    Cut a piece of metal larger than the hole, drill two holes for pop rivets, epoxy the metal to the box, install pop rivets, epoxy around the broken edge, and when dry fill the recess with body filler. Sand and paint.
  5. Kim Dawson

    Building a Scrambler from left overs

    Just a little more done. Got the U-joints in the driveshaft I got from Craig and installed it. Thank you Craig. Put the fluid in the trans and TC. Still waiting for my friend to weld up the exhaust for me.
  6. Kim Dawson

    Full Top Refurb

    Just copy the one you have and make one. Probably quicker than trying to find one.
  7. Kim Dawson

    Brush guards

    Get an original, or an original replacement bumper (which is not as tall as the later Wrangler bumpers) and the brush guards and the bumper ends should fit just fine.
  8. Kim Dawson

    Building a Scrambler from left overs

    Today I put on the offy intake and the rebuilt Holly. Got the fuel filter and fuel and return lines all hooked up. Valve covers on. Finally got the right size belts for the front of the engine and all brackets on. Amazing the alternator took 4 brackets and 4 spacers. Kind of neat the way the...
  9. Kim Dawson

    What intake gaskets for aluminum intake for AMC 304?

    I have an Offenhauser aluminum intake to go on a 304. I bought Edelbrock gaskets thinking they should fit the same. Note with gaskets say to use the gaskets with the AMC metal valley pan gasket and silicone at the front and back. Even the old valley pan is ok to use. Anyone have expierence with...
  10. Kim Dawson

    Building a Scrambler from left overs

    New clutch and pressure plate came so I could do the bell housing and trans so I could figure the right holes to use for the trans mount and the mounting plate. Had to jack the frame apart a little and elongate one hole to get the plate to fit. Made my own torque bolt/mount. Put the transfer...
  11. Kim Dawson

    My Yuppie Jeep

    YJs with the 4 cyl, 5 speed get up and go just fine and travel at highway speeds. I've had 4 of them for my wife and some of the kids. Fun to drive and dependable. They cost less than the 6 cylinder ones but the sixes get better MPG. I miss having a YJ with Borla exhaust to run around town in.
  12. Kim Dawson

    Building a Scrambler from left overs

    Thanks. I'll check that out. This bell housing looks like the right depth. I have another one that is about 2" taller. I was wondering why the trans wouldn't go that last almost 3 inches . . . . wrong clutch plate. Needs the 1 1/8" dia opening and only has about a 1" opening. Just ordered the...
  13. Kim Dawson

    Building a Scrambler from left overs

    Got the Engine mounted in the chassis and put the flywheel and clutch stuff on. Then I noticed that the bell housing had two sets of trans mounting holes but none fit the borg warner 4 speed. So off with the bell housing. There were four more holes that were smaller and shallow that did match so...
  14. Kim Dawson

    Building a Scrambler from left overs

    Got some work done on the engine today. Pistons in and the heads on and some parts on the front. 110 lbs of torque on the head bolts gave my arms a work out. Waiting on new valve lifters. I didn't keep the old ones in order so I can't re-use them or the cam will go flat. Those cam bearings were...
  15. Kim Dawson

    I bent 5/16" tubing. Not a exact as inlinetube, but less cost.

    I bent 5/16" tubing. Not a exact as inlinetube, but less cost.
  16. Kim Dawson

    304 & 999 Scrambler Build

    Been prepping the windshield frame and finally got it ready. Painted it and the storage boxes this evening. Because the other Scrambler body is taking up my under-cover painting area, I put up an EZ-Pop-Up tent to keep the trees from decorating my paint work. I need to get the hood ready for...
  17. Kim Dawson

    Building a Scrambler from left overs

    Got them off Ebay from a1-seatsplus. Put in 1987-2002 jeep wrangler seat covers upholstery and it will come up. Three week lead time.
  18. Kim Dawson

    Building a Scrambler from left overs

    Bought this upholstery kit for some YJ seats I picked up at a swap meet years ago. A place in CT made these. The bottom of the back rests needed a little more vinyl to cover the foam, but overall a nice kit. I've got the carpet and the seats now. Need to get that 304 put together.
  19. Kim Dawson

    Newb ‘84 Build

    Jee that's lookin' good.
  20. Kim Dawson

    What's on your Work Bench?

    My wife has been asking for non-slip steps on her Scrambler for awhile. I have some left over peel and stick ice and water barrier that I've been saving for this. Made a quick pattern from an old step, cut them out with some old scissors, and now she has her non-slip steps.
Back
Top