• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. WildTurkeycj8

    Happy Birthday Scrangler

    Happy Bday, Mike!!!
  2. WildTurkeycj8

    My brother

    Robert - I'm very sorry to hear of the hard times your family has been through. I think the other folks on this board have passed along some great words of wisdom. I wish the best for you, your parents, and the rest of your entire family. -Mike
  3. WildTurkeycj8

    Quick update

    I am using Rubicon Express RE1445 leaf springs at all four corners. Here is a link to their description: http://www.rubiconexpress.com/jeepparts/Product.aspx?part=RE1445 They are 2.5" wide, which is stock for a cj rear, but on the front I went with the RE2785 CJ conversion shackle to make up...
  4. WildTurkeycj8

    Thumbs up to Vanco Brakes

    Maybe you should hear my story... I ordered a Hydroboost kit from Vanco about 5 years ago, before I actually started my build, because it was on an end-of-year special price and I knew that eventually I would need it. Well, the next year I started my teardown and got it put back together as...
  5. WildTurkeycj8

    Agony (ot)

    You need to eat a couple of your jalapenos! They will make you forget all about the pain you are currently in! Get well soon! -Mike
  6. WildTurkeycj8

    MOR comp at Crozet VA

    Nice videos! You seem to know your rig pretty well....there were a couple of times I thought you were going to flop, but you didn't seem to hesitate and really actually didn't look like you came close to flopping.
  7. WildTurkeycj8

    Chiefwaho Upgrading Axles & suspension

    Great work Jason!
  8. WildTurkeycj8

    Scrambled FLA to Va

    Welcome. See you around sometime.
  9. WildTurkeycj8

    Yeeehaaaw ya'll

    Congrats to you Toby!
  10. WildTurkeycj8

    Happy birthday kaiser8

    Happy Bday!
  11. WildTurkeycj8

    New guy

    Good luck getting it! Welcome to the board! -Mike
  12. WildTurkeycj8

    Hydraulic clutch install

    Just came in from working on the jeep. I don't have anywhere near the mechanic experience that you do, so I have been relying on research and recommendations, and am lucky to have a few friends helping me out. I swapped in an LT1 with sm465. Went with the Centerforce Dual Friction...
  13. WildTurkeycj8

    Hydraulic clutch install

    I'm not sure about the differences. I bought this one from Ted Wendel, one of the local guys on this site who usually has most any part you may need. He has taken apart dozens of CJs and YJs, so I'll ask him if he doesn't post up here soon or if no one else replies about that. I will...
  14. WildTurkeycj8

    covering the cowl air inlet

    I need to cover mine too. I was just going to cut a piece of sheet metal and sandwich that under a stock cover, but let me know if you make some up Scott, and how much they would cost. I am going with a this Heater Craft heater (28,000 btu!) http://www.4wd.com/productdetails.aspx?partID=4691...
  15. WildTurkeycj8

    Hydraulic clutch install

    We finished the connections on mine last night and bled the system. Works well, although the Novak slave cylinder bracket has a very slight bit of flex too it, but not really a problem, just something we noticed. I can post up pictures later if you want, but not much to see. BTW, I...
  16. WildTurkeycj8

    Radiator recommendations? (V8 conversion)

    I do alot of things that make no sense, but it sounds like this is one I'd like to avoid! Thanks for the advice...I'll run a separate cooler for that.
  17. WildTurkeycj8

    Radiator recommendations? (V8 conversion)

    Swapping in an LT1 and looking for a good buy on an aluminum radiator. I have been doing some internet research and have read that the size of the fluid channels, the number of fins per inch, and other factors make a big difference. Anyway, I'm looking at maybe one from this...
  18. WildTurkeycj8

    LJ8 - he's back...

    Welcome back! Looks like a really nice build. Good heads-up on the air filter..I have to figure something out for mine, and was thinking about walking the local scrapyard to see about finding the right size pieces, but maybe I'll check out the ricer aisle, too! Where did you get your...
  19. WildTurkeycj8

    Waiting for the transport truck to deliver my first Scrambler

    Looks like you found a great scrambler and a good friend....hard to beat Toby when it comes to being a "good guy"! congrats on both and welcome to the site.
Back
Top