• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. J

    Recommendation for Diesel Swap?

    Never finished researching this years ago. Was interested in the 5 cyl for a while. Couldn't get around the oil pan configuration and the high milage.
  2. J

    Lift question

    Other than tire fitment; you might be happy as it sits just removing the body lift without really needing to do anything doing anything else. Is the rear SOA? From the pic, rear spring does not look like it has lift.
  3. J

    Project Panel Replacement

    Almost had a 97 Wrangler for the power train on the TJ/YJ build I am finishing up on. Went with a 04 Rubicon platform for the YJ body to sit on. I have 95 YJ engine harness/ECU so the 4.0 distributorless ignition has been converted over to a distributor type and the 95 engine harness connectors...
  4. J

    SOLD. I must be nuts…Now For Sale. See last post-

    I am of the mindset that as a tax paying citizen I should have the right to own firearms of equal capability that my local law enforcement possess. Nothing more nothing less. In our area it is not the gun but the ammo that has become scarce.
  5. J

    Body mount capture nut options?

    I reused the flat stock. Cut into the crib to release the plate. Torch the sheared bolt to a glow. Quench in cool water. Busted frozen bolt will almost come out by hand. Clean, paint, chase the threads, rebuild the pocket install new bolt.
  6. J

    Belizeit's 1984 CJ-7 Engine Swap/Upgrade

    Really like the Craftsman Kromedge 5201 series set. Can still find them in good shape on Ebay. Both my boys have the SAE set. I have the metric set 52095 as well..harder to find but out there.
  7. J

    Belizeit's 1984 CJ-7 Engine Swap/Upgrade

    Good the yoke was shot. There are tap removal tools. They look finicky but I have been pretty lucky using them. Millwright at work turned me on to them.
  8. J

    Project Panel Replacement

    I purchased used OEM bolts and body bushings and by chance found this discrepancy...glad I did before the brace was installed.
  9. J

    Project Panel Replacement

    Did you check the body mount captured nut size to body bolt being used on the floor brace? Seem to remember having an issue; I was also using a YJ style set up but didn't think there were any changes in bolt sizes. Made new out of bar stock.
  10. J

    Belizeit's 1984 CJ-7 Engine Swap/Upgrade

    I have an 03 Rubicon power train, frame platform with a 95 YJ tub. Just getting ready to modify the 03 4.0 to behave with the 95 ecu/engine harness. First on the list is removing the cam sensor and installing a distributer. Will be watching your write up. Then repin/connector compatable the...
  11. J

    Swaybar end link.. nut on spring perch…. Size?

    Off the top of my head think it is 1/2" x 20 thread. Seem to remember that was the die size to clean the ends up. I can check to confirm.
  12. J

    304 exhaust system

    A little out of the box...but what about a ScoutII exhaust. Just a thought. Custom is probably the quickest and cleanest.
  13. J

    Project Panel Replacement

    What was the kit and bar you used. Like that option.
  14. J

    Project Panel Replacement

    Listen mostly to concert generated bootleg Dead. Cassettes are old.. Nick Cave and the Bad Seeds, True Widow and others usually find an in somewhere. You are motoring on the build. Fun to follow along.
  15. J

    82 UK Spec Laredo Scrambler Build No 2

    I have really liked using walter flex cut grinding disk on sheet metal cut and but grind out. It grinds cooler and really removes material quickly and does a nice job feathering.
  16. J

    82 UK Spec Laredo Scrambler Build No 2

    Very nice! To bad it is destined to be covered.
  17. J

    AMC 20 Pinion Seal - Yoke Replacement

    Slop and noise are good indicators of an issue. As it is right now if it rotates in your hand smoothly, and feels stable side to side. I would retorque it.
  18. J

    AMC 20 Pinion Seal - Yoke Replacement

    Just questioning. Looking at the seal failure, are the pinion bearings good??
  19. J

    CJ8 on a JL frame?

    I have taken pics but haven't posted. Didn't feel it fit and it has become my distraction...much to the dismay of my wife...it has however allowed me to expirement and learn more metal body work. The 8 will thank me when I refocus on that body.
Back
Top