Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Another place to check is Jeep Thrills Off Road in Compton, CA 310 608-3250
It's been 15 years since I was there, but Albert had half tops lined up and bulkheads stacked up. I bought a bulkhead for 200 at the time. I thought it was a little high then, but I choose a near perfect one. I bought...
Been working on grab bars, wheels, and console pads the last couple weeks. Got low on slate blue and nutmeg so I painted some and are getting them covered. I use one sewing machine without thread only to punch holes in the leather covers for wheels and grab bars. The first group of pads I made...
Today I fitted the carpet and got the shifter boots installed. Then I scrounged up some seat adjusters and got them and the seat brackets together and installed the seats. Nice to have them off of my bench. The trans shifter boot was only 7.99 delivered. I don't know how they can make anything...
Went through my tub of tail lights. Did some swapping around of innards and plugs to make a decent pair. Pulled the tail light wiring harness from my rusty postal tub, cleaned it up, installed it and connected up to the under-dash harness. Also put the tail gate brackets and cables and carrier...
Today I got the body mounts in place and the body bolted down. Not as easy as it sounds on this one. A previous owner had replaced and added sheetmetal to the floor areas which changed the height of the floor in some places. I set it on the body mounts front and rear and measured the...
Exhaust is all done. My friend brought the chassis back this evening. Backed it under the body. Will straighten it out in the daylight. I like centering the tank and running the dual exhaust alongside the tank and out the back. Finally some more progress.
Did this red custom wheel for a speed shop. Thick leather gave my fingers a work out. My east coast personal shopper got six wheels for me this year. Thanks Eric. I bought three wheels from Ebay and covered the CJ Laredo deep spoke one. The Early Sport wheels (3-holes per spoke) were elusive...
Had my neighbor weld in the patch pieces I made to fix this windshield. Water got behind the rubber and rusted out these two places with a vengeance. This was left over after I replaced it with a nice no-rust CA desert frame. My neighbor is finishing up welding the exhaust and I should have the...
Had a couple of almost 70 degree days and got the hood painted. Unless I decide to put hard doors on this, all white body parts (except a rear step bumper) are painted.
If you want the metallic you probably will have to buy the automotive paint and spray it. If you want to match the honey used in 1985 and 86 interiors, then you can get a spray can of SEM Color Coat in Camel color and it matches well.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.